Fuji Xerox DocuPrint P385 dw User Manual page 284

Level 1 Level 2
WLAN TCP/IP
Setup Wizard
WLAN Assistant
WPS
WPS w/PIN Code
WLAN Status
MAC Address
Set to Default
WLAN Enable
Level 3 Description
Choose the IP method that best suits your needs.
Boot Method
Enter the IP address.
IP Address
Enter the Subnet mask.
Subnet Mask
Enter the Gateway address.
Gateway
Specify the number of attempts the machine will try to
IP Boot Tries
obtain an IP address when the Boot Method is set to
any setting except Static.
Allocate the IP address from the link-local address
APIPA
range automatically
Enable or disable the IPv6 protocol.
IPv6
- Configure the wireless network settings using the
setup wizard.
- Configure your wireless network settings using the Fuji
Xerox installation disc.
- Configure your wireless network settings using the
one-button push method.
- Configure the wireless network settings using WPS
with a PIN code.
Display the wireless Ethernet link status.
Status
Display the signal condition.
Signal
Display the channel in use when Status is Active.
Channel
Display the connection speed when Status is
Speed
Active.
Display SSID.
SSID
Display the current Communication Mode.
Comm. Mode
- Display the MAC address of the machine.
- Restore wireless network settings of your machine to
the factory settings.
- Turn the wireless interface on or off.
*1 .
284