Gamma - Toshiba BU Series Instruction Manual

Gamma

This section describes Gamma correction of AnalogControl category for the BU series.
This function allows you to apply a gamma correction to the output images.
● Registers
Register
Gamma
● Setting
- Set Gamma correction
Set the following value to "Gamma" register. Setting value is Float type.
Copyright © 2016 – 2019 Toshiba Teli Corporation, All rights reserved.
output
luminance
Gamma
Gamma correction
Visibility Access
Beginner R/W Sets the Gamma correction.
Gamma
Minimum
Maximum (*)
input
luminance
Description
Value
0.45
1.00
* initial factory setting
62 / 80
http://www.toshiba-teli.co.jp/en/index.htm
D4256843D
xB