Blacklevel - Toshiba BU Series Instruction Manual

BlackLevel

This section describes BlackLevel control of AnalogControl category of the BU series.
This control adjusts the black level of the image. It is adjustable from -25% to +25% as white saturation level
is 100%. However, when BlackLevel is lower than 0[%], the image level may not be saturated.
● Registers
Register
BlackLevel Beginner
● Setting
- Set Black Level
Set the following value to "BlackLevel" register. Setting value is Float type.
Copyright © 2016 – 2019 Toshiba Teli Corporation, All rights reserved.
Visibility Access
R/W Sets the absolute Black Level.
BlackLevel
Minimum
Maximum
* initial factory setting = 0.00[%]
Black Level
Description
Value
-25.00[%]
+25.00[%]
61 / 80
D4256843D
http://www.toshiba-teli.co.jp/en/index.htm
xB