Toshiba BU Series Instruction Manual page 36

● Setting
- Select an image format.
Select "Fomat0" of "ImageFormatSelector" register.
- Set image size and image start position
Set the following value to "Width", "Height", "OffsetX", "OffsetY" registers. Setting value is Integer type.
"Width", "Height" registers are image size setting. "OffsetX", "OffsetY" registers are image start position
setting.
● Note
Changing "Width", "Height", "OffsetX", "OffsetY" register value is invalid during image stream data output.
Copyright © 2016 – 2019 Toshiba Teli Corporation, All rights reserved.
Model
Width/OffsetX unit size
Height/OffsetY unit size
Minimum unit size
Maximum unit size (*)
35 / 80
BU132M
4
2
64 x 64
1280 x 1024
* initial factory setting
http://www.toshiba-teli.co.jp/en/index.htm
D4256843D
xB