● Setting
- Select an image format.
Select "Format1" of "ImageFormatSelector" register.
- Set binning operation
Set the binning pixels to "BinningHorizontal", "BinningVertical" registers. When you set up a value of the
one side for horizontal or vertical binning, the other side of the value is set up automatically. Setting value is
Integer type.
● Note
Binning is disabled when the camera is running in Scalable mode or Decimation mode.
Scalable and Decimation are disabled when the camera is running in Binning mode.
Changing "BinningHorizontal", "BinningVertical" register value is invalid during image stream data output.
Copyright © 2016 – 2019 Toshiba Teli Corporation, All rights reserved.
Model
Minimum setting (*)
Maximum setting
37 / 80
BU132M
1(H)×1(V)
2(H)×2(V)
* initial factory setting
http://www.toshiba-teli.co.jp/en/index.htm
D4256843D
xB