Advertisement
Selecting On Timer
8
E-
The On Timer enables you to switch on the ventilator automatically
after a given period of time. You can set the period from 0 minute to
60 minutes. You can set the On Timer only when the ventilator is off.
1
Press
buttons once to set the On Timer.
Result:
flickers when you press the button once.
2
Press
buttons until the required time is
displayed.
Result:
Each time you press the buttons, you can
adjust the time by 1 minute from 0 to 60
minutes.
By holding down
than 3 seconds, you can adjust the time by
10 minutes.
3
Press
(Confirm/Cancel) button to complete the setting.
Result:
is displayed.
If you do not press
button in 5 seconds after selecting the period,
the On Timer is canceled automatically.
Make sure that the
To cancel the On Timer, press
again.
When controlling the ventilator by external control,
the ventilator will turn on after the connected indoor unit has
been turned on. If you do not cancel the On Timer,
it will run continuously.
buttons for more
flickering stops and the remaining time
indicator turns on.
(Confirm/Cancel)
indicator comes on.
(Confirm/Cancel) button
Advertisement
