Text Message (Sms) Alert; Alert Settings For Your Dect Phone - Panasonic KX-TGF675 Operating Instructions Manual

3
Follow the on-screen instructions.
Important:
R For further information, refer to the
instructions on web page listed above.
R To use this feature, the following settings
are required.
– Android phone: Bluetooth must be
turned on.
– Android phone: [Application Alerts
manager] must be turned on.
– Handset or base unit: "Alert On/
Off" must be turned on (page 65).
R If this feature does not work, turn on your
device's Bluetooth feature, unplug the base
unit's AC adaptor, and then reconnect it.
R If this feature still does not work properly
after performing the above operation,
re-install the Link to Cell app.

Text message (SMS) alert

®
For iPhone and BlackBerry
This feature alerts you on your DECT phone
when your paired cellular phone receives SMS
messages. The Link to Cell app is not required
for iPhone and BlackBerry users.
Important:
R Your cellular phone must support Message
Access Profile (MAP) specification.
R For further information, refer to the
instructions on web page listed below:
www.panasonic.net/pcc/support/tel/sms/
R To use this feature, the following settings
are required:
– iPhone and BlackBerry Phone:
Bluetooth must be turned on.
– Handset or base unit: "Alert On/
Off" must be turned on (page 65).
R If this feature does not work, turn on your
device's Bluetooth feature, unplug the base
unit's AC adaptor, and then reconnect it.
For assistance, please visit http://shop.panasonic.com/support
Alert settings for your
DECT phone
If your cellular phone is paired to the base unit
and receives notifications, the handset and/or
base unit can alert you:
– by briefly displaying a message
– by announcement
– by sounding alert tones
Important:
R For Android users: Use the Link to Cell app
Turning alert on/off
Once this feature is turned on, it will alert you
on the handset and base unit when your
cellular phone receives notifications.
– "On" (default): The handset and/or base
– "Off": The handset and/or base unit do
®
users
You can configure this setting using either the
base unit or one of the handsets.
1
2
3
Setting the voice alert
You can turn on/off the voice alert.
– "On" (default): The handset and/or base
– "Off": Voice announcement is not
You can configure this setting using either the
base unit or one of the handsets.
1
Using Bluetooth® Devices
to enable the desired alerts (page 64).
unit alert you.
not alert you.
Handset / Base unit
For CELL 1: MMENUN#6101
For CELL 2: MMENUN#6102
MbN: Select the desired setting. a
MSAVEN
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
unit notify you by voice announcement.
available as alert.
Handset / Base unit
For CELL 1: MMENUN#6031
For CELL 2: MMENUN#6032
65