Panasonic KX-TGF675 Operating Instructions Manual page 38

Automated Call Block
Note:
R We recommend you perform a test run of
the automated call block procedure to
ensure that the automated call block
feature is set correctly.
Changing the access code
If the unit answers undesirable calls such
robocalls even though the automated call
block function is on, change the access code
(3 digits max.). The default setting is "1".
Handset
1
MCALL BLOCKN a MSELECTN
2
MbN: "Access code" a MSELECTN
3
MCLEARN
4
Enter the new access code. a MSAVEN
R If you already recorded the greeting
message for automated call block,
continue from step 4, "Recording a
greeting message for automated call
block", page 39.
5
MOFFN
Displaying and clearing the
blocked call count
The total number of blocked calls (up to
65,000) will be displayed.
Handset
1
MCALL BLOCKN a MSELECTN
2
MbN: "Blocked calls count" a
MSELECTN
R To exit, press MOFFN.
3
MCLEARN
4
MbN: "Yes" a MSELECTN a MOFFN
Base unit
1
MCALL BLOCKN a MSELECTN
2
MbN: "Blocked count" a MSELECTN
R To exit, press MEXITN.
3
MCLEARN
4
MbN: "Yes" a MSELECTN a MEXITN
For assistance, please visit http://shop.panasonic.com/support
38
Adding to the allow name list
You can allow specific callers to pass through
by adding the caller's name to the allow name
list even if you do not know the caller's
number.
You can store up to 100 names (16 characters
max.). If the name stored in the allow name list
matches the incoming Caller ID, the unit rings.
Callers listed in the allow name list are not
required to enter the access code.
Adding allowed names from the
caller list
Handset
n When a cellular phone is paired:
1
MCNCID
2
MbN: Select the desired entry. a
MSELECTN
3
MSAVEN
4
MbN: "Allow name" a MSELECTN
n When a cellular phone is not paired:
1
MCN CID
2
MbN: Select the desired entry. a
MMENUN
3
MbN: "Save allow name" a
MSELECTN
Base unit
1
MCNCID
2
MbN: Select the desired entry. a MSAVEN
3
MbN: "Allow name" a MSELECTN
Viewing/erasing an entry
Handset
1
MCALL BLOCKN a MSELECTN
2
MbN: "Allow name list" a MSELECTN
3
MbN: Select the desired entry.
R After viewing, press MOFFN to exit.
4
MERASEN a MbN: "Yes" a MSELECTN
a MOFFN