Table of Contents
Advertisement
Troubleshooting
If you have any problems with your appliance, you should check the
following troubleshooting steps prior to calling CDA Customer Care
to help avoid unnecessary service visits. Contact details for CDA
Customer Care are on page 18 and the rear cover of this manual.
•
If there is no power to the oven.
Check that the mains power supply is switched on. If it is and the oven
the fuse at the spur. Replace the fuse and try switching the power
back on.
•
If there is power to the oven (the programmer is on/lit) but the
oven is not heating.
It is possible that the current time/clock has not been set. Switch the
The clock should show '12:00' and a flashing rectangular indicator by
the clock symbol on the control panel. Use the
current time. After approximately 5 seconds the time should set and
the oven should function as normal.
It is also possible that the automatic cooking function and a cooking
duration have been engaged. This is signified by the end of cooking
time indicator and the cooking time indicator being on. To cancel this
function, press ok until the cooking time indicator flashes. Use
return the cooking duration to '0.00'. After approximately 5 seconds
you should be able to use your oven as normal.
or
keys to set the
to
17
Advertisement
Table of Contents
