Controls & Features - MTD 020 Series Operator's Manual

Controls and Features
Recoil Starter
Blade Control
The blade control is attached to the upper handle of the mower.
Depress and squeeze it against the upper handle to operate the
unit. Release it to stop engine and blade.
WARNING:
Never attempt to bypass its operations.
14
This blade control is a safety device.
Blade Control
Figure 4-19
Primer
The primer is located on the left side of the
engine. The primer is used to pump gas into
the carburetor and aid in starting the engine.
Recoil Starter
The recoil starter is attached to the right upper handle. Stand
behind the unit and pull the recoil starter rope to start the unit.
4
Primer