MTD 020 Series Operator's Manual
  1. Manuals
  2. Brands
  3. MTD Manuals
  4. Chipper/shredder
  5. 020 Series
  6. Operator's manual
MTD 020 Series Operator's Manual

MTD 020 Series Operator's Manual

Hide thumbs Also See for 020 Series:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Download this manual
OPERATOR'S MANUAL
Chipper Shredder
Vacuum
Model Series 020
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
Warning:
This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-
covered, brush-covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting
applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.
In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have
similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized
service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-0019.
MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
PRINTED IN U.S.A.
770-10535C.fm
FORM NO.
(5/02)

Advertisement

Chapters

Table of Contents
loading

Related Manuals for MTD 020 Series

Summary of Contents for MTD 020 Series

  • Page 1 Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-0019. MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 PRINTED IN U.S.A.

  • Page 2: Table Of Contents

    For future reference, please copy the model number and the serial number of the equipment in the space below. Copy the model number here: MTD LLC Copy the serial number here: P. O. BOX 361131...

  • Page 3: Important Safe Operation Practices

    SECTION 1: IMPORTANT SAFE OPERATION PRACTICES WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury.
  • Page 4 Never store the machine or fuel container 9. Never operate without either the inlet nozzle or inside where there is an open flame, spark, optional hose attachment properly attached to the or pilot light (e.g. furnace, water heater, machine. Never attempt to attach or change either space heater, clothes dryer, etc.) attachment while the engine is running.

  • Page 5: Assembling Your Chipper Shredder Vacuum

    WARNING - YOUR RESPONSIBILITY: Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine. NOTE: Not all safety labels shown may apply to your chipper shredder vacuum. SECTION 2: ASSEMBLING YOUR CHIPPER SHREDDER VACUUM This unit is shipped without gasoline or oil IMPORTANT:...
  • Page 6 Attaching The Handle • Unfold the upper handle until it aligns with the lower Bag Handle handle. • Secure the two handles by tightening the wing nuts Stud (carriage bolts must be seated properly into the handle). See Figure 1. •...

  • Page 7: Know Your Chipper Shredder Vacuum

    SECTION 3: KNOW YOUR CHIPPER SHREDDER VACUUM Blower Chute Bag Handle Nozzle Height Adjustment Lever Chipper Nozzle Chute Figure 5 Read this operator’s manual and safety rules before Nozzle operating your chipper shredder vacuum. Compare the Yard waste such as leaves and pine needles can be illustrations in Figure 5 with your unit to familiarize vacuumed up through the nozzle for shredding.

  • Page 8: Operating Your Chipper Shredder Vacuum

    SECTION 4: OPERATING YOUR CHIPPER SHREDDER VACUUM WARNING: The operation of any chipper • Grasp bag handle with one hand and pull lock rod shredder vacuum can result in foreign on mounting bracket with other hand toward engine objects being thrown into the eyes, which to release.

  • Page 9: Maintaining Your Chipper Shredder Vacuum

    vines until they are thoroughly dried out. Materials such WARNING: Do not at any time make any as stalks or heavy branches up to 1 1/2” in diameter adjustments without first stopping engine may be fed into the chipper chute. See Figure 7. and disconnecting spark plug wire.
  • Page 10 WARNING: Always stop engine • Remove the bag or blower chute from the unit as disconnect spark plug wire before instructed in the OPERATION section to obtain cleaning, lubricating or doing any kind of access to flail screen. See Figure 9. maintenance on your machine.
  • Page 11 • Remove the shoulder screws and bell washers that • Apply lubricant to the threads of impeller removal go through the pivot arms and height bracket tool and then thread the tool into the crankshaft. adjusters to the front support brace. Stop when the impeller assembly can move on the •...

  • Page 12: Troubleshooting

    SECTION 6: TROUBLESHOOTING Problem Cause Remedy Engine fails to start 1. Spark plug wire disconnected. 1. Connect wire to spark plug. 2. Fuel tank empty or stale fuel. 2. Fill tank with clean, fresh gasoline. 3. Throttle control lever not in correct 3.
  • Page 13 NOTES...
  • Page 14 Model Series 020...
  • Page 15 Model Series 020 Ref. Ref. Part No. Part Description Part No. Part Description 725-1700 Switch Cover 710-1054 Hex Screw 5/16-24 x 1.0 725-3166 Safety Switch 781-0490 Chipper Blade 710-0224 Hex Washer Screw #10-16 x.50 736-0119 Lock Washer 5/16 629-0920 Wire Harness 712-0411 Hex Lock Nut 5/16-24 710-0604A...
  • Page 16 Model Series 020...
  • Page 17 Model Series 020 Ref. Ref. Part No. Part Description Part No. Part Description 749-0438D Upper Handle 738-1015 Shoulder Screw 3/8-16 720-0314 Handle Knob 5/16-18 781-0725A Front Wheel Support Brace 710-1174 Carriage Bolt 781-0785 Height Adjustment Bracket 749-0907B Lower Handle 738-1185 Stud 5/16-18 .56 x .75 664-0095 Bag Assembly...
  • Page 18 Notes...
  • Page 19 (Número de serie) Copie el número del modelo en este espacio: Copie el número de serie en este espacio: MTD PRODUCTS INC CLEVELAND, OHIO 44136 SERVICIO TELEFÓNICO DE ASISTENCIA AL CLIENTE En caso de tener problemas para ensamblar este producto o de tener dudas con respecto a los controles, funcionamiento o mantenimiento del mismo, por favor comuníquese con el Departamento de asistencia al...

  • Page 20: Medidas Importantes De Seguridad

    SECCIÓN 1: MEDIDAS IMPORTANTES DE SEGURIDAD ADVERTENCIA: La presencia de este símbolo indica que se trata de instrucciones importantes de seguridad que debe respetar para evitar poner en riesgo su seguridad personal y / o material y de otras personas. Lea y siga todas las instrucciones contenidas en este manual antes de intentar poner esta máquina en funcionamiento.
  • Page 21 Antes de encender la máquina compruebe que el canal de la 13. No opere esta máquina estando bajo los efectos del alcohol o cortadora, la toma de alimentación y la cámara de corte están de drogas. vacías y sin escombros. 14.

  • Page 22: Montaje De La Cortadora Trituradora Aspiradora

    SECCIÓN 2: MONTAJE DE LA CORTADORA TRITURADORA ASPIRADORA IMPORTANTE: Montaje de la manija Esta unidad se envía sin gasolina ni aceite en el motor. Antes de operar la máquina cargue el motor con gasolina y • Despliegue la manija superior hasta que quede alineada con la aceite como se indica en el manual separado del mismo.

  • Page 23: Conozca Las Propiedades De La Cortadora Trituradora Aspiradora

    • Sostenga la manija de la bolsa con una mano y deslice la varilla seguridad quede presionado totalmente por la aleta delantera de seguridad del soporte de montaje hacia el motor con la otra del canal de soplado. mano. Use el extremo del soporte de montaje como palanca •...
  • Page 24 Canal de soplado (Si está incluido) Palanca de control del regulador (No se enseña) Cuando se lo une a la unidad el canal de soplado se utiliza para La palanca de control del regulador está ubicada en el motor. soplar o esparcir por los patios los desechos que se acumulan en los Controla la velocidad del motor y lo detiene.

  • Page 25: Funcionamiento De La Cortadora Trituradora Aspiradora

    • Gire los dos botones de la parte posterior de la bolsa para máquina para triturar o picar el material integrante de la vegetación abrirla y vaciar el contenido. Ver Figura 6. que se encuentra en un patio normal (es decir, ramas, hojas, ramas •...
  • Page 26 • Limpie el depurador de aire cada 25 horas en condiciones La bujía debe limpiarse y se debe reponer la distancia disruptiva una normales o una vez por temporada. Limpie a intervalos de vez por temporada. Consulte el manual del motor para conocer las especificaciones para el tipo de bujía y para la distancia disruptiva.
  • Page 27 • Cuando afile las hojas, protéjase las manos mediante el uso de guantes y siga el ángulo original de molido. • Para realizar el reensamblado siga los pasos anteriores pero en orden inverso. • Ajuste los tornillos de la hoja con un par de torsión de 210-250 in-lbs.

  • Page 28: Guía Para La Solución De Problemas

    SECCIÓN 6: GUÍA PARA LA SOLUCIÓN DE PROBLEMAS Problema Causa Solución El motor no arranca Se ha desconectado el cable de la bujía. Conecte el cable a la bujía. El tanque de combustible está vacío o el Llene el tanque con gasolina limpia y fresca. combustible es viejo.
  • Page 31 MTD Products Inc. para su uso con el(los) producto(s) anteriormente, extendida por personas o personas incluido(s) en este manual anulará la garantía en lo que jurídicas, incluidos los distribuidores o los minoristas...
  • Page 32 MANUFACTURER’S LIMITED WARRANTY FOR: The limited warranty set forth below is given by MTD LLC with MTD LLC does not extend any warranty for products respect to new merchandise purchased and used in the sold or exported outside of the United States, its posses- United States, its possessions and territories.

Table of Contents