Onkyo TX-NR787 Instruction Manual page 7

1. ON/STANDBY button
2. MUSIC OPTIMIZER button/indicator: Turns on/off the MUSIC OPTIMIZER
function that improves the quality of the compressed audio.
3. HYBRID STANDBY indicator: Lights if the unit enters standby mode when the
functions such as HDMI Standby Through and Network Standby that work in
standby are enabled.
4. Remote control sensor: Receives signals from the remote controller.
• The reception range of the remote controller is within a distance of approx.
16´/5 m, and an angle of 20° in vertical direction and 30° to right and left.
5. ZONE 2/ZONE 3 button: Controls the multi-zone function. (
6. DIMMER button: Switches the brightness of the display with three levels. It
cannot be turned off completely.
7. Display ( p8)
8. SETUP button: You can display advanced setting items on the TV and the
display to have a more enjoyable experience with this unit. (
9. Cursor buttons ( / / / ) and ENTER button: Select an item with the
cursors, and press ENTER to confirm your selection. When using TUNER, use
them to tune in to stations. ( p78)
10. RETURN button: Returns the display to the previous state while setting.
11. MASTER VOLUME
12. Press the LISTENING MODE button (above) to select a category from "Movie/
TV", "Music" and "Game", and then turn the LISTENING MODE dial (below) to
change the listening mode. ( p86)
13. You can adjust the sound quality of the speakers. Press the TONE button
(above) to select an item to adjust from "Bass" and "Treble", and turn the
TONE dial (below) to adjust. (
14. PHONES jack: Connect headphones with a standard plug (ø1/4"/6.3 mm).
15. Input selector buttons: Switches the input to be played.
16. SETUP MIC jack: Connect the supplied speaker setup microphone. (
17. AUX INPUT AUDIO/HDMI jack: Connect a video camera, etc. using a stereo
mini plug cable (ø1/8"/3.5 mm) or HDMI cable. (
p84)
p106)
p85)
p52)
Contents Connections
≫
p138)
7
Front
Playback
≫
Panel≫ Rear Panel≫ Remote≫
Setup
≫ ≫