Download
Share
Print this page
Onkyo TX-NR6100 Instruction Manual
  1. Manuals
  2. Brands
  3. Onkyo Manuals
  4. Stereo Receiver
  5. TX-NR6100
  6. Instruction manual

Onkyo TX-NR6100 Instruction Manual

Hide thumbs Also See for TX-NR6100:

Advertisement

Quick Links

Instruction Manual
AV RECEIVER
TX-NR6100
En

Advertisement

loading

Related Manuals for Onkyo TX-NR6100

Summary of Contents for Onkyo TX-NR6100

  • Page 1 Instruction Manual AV RECEIVER TX-NR6100...

  • Page 2: Table Of Contents

    Table of contents Firmware Update Speaker Layout Troubleshooting Main Room Main Room Room Supplementary Information Zone 2 Zone 2 Zone 2 Zone 2 Speaker Connections Reducing the Power Consumption in Standby State When the following functions are enabled, the power consumption in standby state increases.

  • Page 3: Speaker Layout

    Connections Before starting the procedure Firmware Update Connecting the TV Update Information of the firmware To ARC/eARC TV Firmware Update Procedure To Non-ARC TV Part Names Connecting the SUB Monitor Front Panel SUB Monitor Display Connecting Playback Devices Rear Panel Connecting an AV Component with HDMI Jack Remote Controller Mounted...
  • Page 4 Player 12 settings ® Operating this unit Playing Back Amazon Music Play Queue Registering This Unit with Amazon Music Adding Play Queue Information Playing Amazon Music using the Onkyo Controller Sort and Delete Playing Amazon Music using the remote controller Playing Back...
  • Page 5 General Specifications 2. Speaker 3. Audio Adjust 4. Source 5. Hardware 6. Multi Zone 7. Miscellaneous Web Setup Menu operations Initial Setup with Auto Start-up Wizard Operations Onkyo Controller Main features Initial Setup Troubleshooting When the unit is operating erratically...
  • Page 6 Before starting the procedure „ What's in the box • Initial Setup Guide (1) * This is an online user manual. This is not supplied with the product. „ Note • Connect speakers with an impedance of 4 Ω to 16 Ω. •...
  • Page 7 Firmware Update Updating the Firmware via Network This unit is equipped with a function to update the firmware via network or USB port when the firmware update is announced after purchase. This enables • While updating the firmware, do not do the following: various functions to be added and operations to be improved.
  • Page 8 Updating via USB represents an alphanumeric character.) Refer to the following descriptions and check. • While updating the firmware, do not do the following: Error Code – Disconnecting and reconnecting cables, USB storage device, speaker • -01, -10: setup microphone or headphones, or performing operations on the unit Ethernet cable not found.
  • Page 9 4. Connect the USB storage device to the USB port of this unit. • Others: • If an AC adapter is supplied with the USB storage device, connect the AC After removing the power plug once, insert it to the outlet, and then start the adapter, and use it with a household outlet.
  • Page 10 Part Names Front Panel is within a distance of approx. 16´/5 m, and an angle of 20° in vertical direction and 30° to right and left. 5. ZONE 2 button: Controls the multi-zone function. ( →p89) 6. OFF button: Switches the multi-zone function off.
  • Page 11 Front Panel 13. PHONES jack: Connect headphones with a 17. SETUP MIC jack: Connect the supplied speaker standard plug (ø1/4″/6.3 mm). setup microphone. ( →p136) 14. LISTENING MODE buttons: Switches the 18. USB port: Connect a USB storage device to play listening mode ( →p71) by pressing "MOVIE/ music files.
  • Page 12 Display B: Audio is output only to ZONE B. AB: Audio is output to both ZONE A and ZONE 3. Lights according to the type of input digital audio signal and the listening mode. 4. Lights in the following conditions. RDS (European, Australian and Asian models): Receiving RDS broadcasting.
  • Page 13 Rear Panel 3. HDMI OUT jacks: Transmit video signals and audio signals with an HDMI cable connected to a monitor such as a TV or projector. 4. Wireless antenna: Used for WI-Fi connection or when using a BLUETOOTH 90° enabled device. Adjust the 180°...
  • Page 14 Rear Panel 12. SUBWOOFER PRE OUT jacks: Connect a powered subwoofer with a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each SUBWOOFER PRE OUT jack. 13. SPEAKERS terminals: Connect speakers with speaker cables.
  • Page 15 Remote Controller ON/STANDBY button Also, when the "BLUETOOTH" input selector is 2. Input selector buttons: Switches the input to be selected, pressing and holding this button for 5 played. seconds or more will switch to the pairing mode. 3. Play buttons: Used for playback operations button: Returns the display to the previous for the Music Server ( →p96) or USB device state while setting.
  • Page 16 Remote Controller 12. TONE buttons: Adjusts the sound quality. Press Australian, Taiwanese and Asian models)/FM "TREBLE", "BASS", or "VOCAL" to select what radio stations. ( →p70) you want to adjust, then adjust with + and -. 19. MODE button: Switches between automatic TREBLE/BASS button: You can adjust the tuning and manual tuning for AM (North sound quality of the front speakers.

  • Page 17: Zone 2

    Inputting Characters You can input characters or symbols on the keyboard displayed on the TV • Select "A/a" to switch between upper and lower cases. (Can also be switched screen such as when inputting a password for Wi-Fi Setup ( →p122) or naming with the MODE button on the remote controller.) a preset radio station ( →p118).
  • Page 18 Speaker Layout This unit can be used in different ways, depending on the layout of the speakers you are installing. Select the speaker layout that suits the installation environment, then confirm the methods for installation and connection. Speaker Layout 3.1ch 5.1ch 7.1ch ‰...
  • Page 19 Speaker Layout The listening room and the speaker layout 1. ZONE A Speakers The speaker system set up in the main room (where this unit is located). 2. ZONE 2 Speakers The 2 ch speaker system set up in a separate room (ZONE 2). This enables you to play the same source in the main room and the separate at the same time, or to play separate sources.
  • Page 20 Speaker Layout 3.1 Channel System A 3.1 Channel System that combines front speakers with a center speaker and a subwoofer. Basic system ( →p26) 3.1 ch + ZONE 2 ( →p26) 3.1 ch (Bi-Amping (Front)) ( →p26) Main Room Zone 2 Zone 2 3.1ch 5.1ch...
  • Page 21 Speaker Layout 5.1 Channel System This is a basic 5.1 Channel System. Basic system ( →p26) 5.1 ch + ZONE 2 ( →p26) 5.1 ch (Bi-Amping (Front)) ( →p26) Main Room Zone 2 Zone 2 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch...
  • Page 22 Speaker Layout 7.1 Channel System This is a 7.1 Channel System that consists of the basic 5.1 Channel System and added surround back speakers. Basic system ( →p27) 7.1 ch + ZONE 2 ( →p27) Main Room Zone 2 Zone 2 3.1ch 5.1ch 7.1ch...
  • Page 23 Speaker Layout 3.1.2 Channel System A Speaker System that is a 3.1 Channel System with one set of height speakers added. 3.1.2 ch (Front High or Rear High) ( →p28) 3.1.2 ch (Top Front or Top Middle or Top Rear) 3.1.2 ch (Dolby Enabled Speakers (Front)) ( →p28) ( →p28)
  • Page 24 Speaker Layout 5.1.2 Channel System A Speaker System that is a 5.1 Channel System with one set of height speakers added. 5.1.2 ch (Front High or Rear High) ( →p29) 5.1.2 ch (Top Front or Top Middle or Top Rear) 5.1.2 ch (Dolby Enabled Speakers (Front or ( →p29) Surround)) ( →p29)
  • Page 25 Speaker Installation How the speakers are set up depends on the size and shape of the room, so here we introduce just a basic layout example. The alphabetic symbols used in this chapter represent the following speakers: Front speaker Left Front speaker Right Center speaker Surround speaker Left...
  • Page 26 Speaker Installation „ 3.1 Channel System „ 5.1 Channel System a: 22° to 30° a: 22° to 30°, b: 120° FL, FR Place the Left and Right Front Speakers to match ear height. FL, FR Place the Left and Right Front Speakers to match ear height. The center speaker should be set up facing the listening position at The center speaker should be set up facing the listening position an angle.
  • Page 27 Speaker Installation „ 7.1 Channel System a: 22° to 30°, b: 90° to 110°, c: 135° to 150° FL, FR Place the Left and Right Front Speakers to match ear height. The center speaker should be set up facing the listening position at an angle.
  • Page 28 Speaker Installation „ 3.1.2 Channel System Top Speakers High Speakers a: 22° to 30° a: 30° to 55° 3´ (0.9 m) b: 65° to 100° or more c: 125° to 150° 3´ (0.9 m) or more TFL, TFR Fit top front speakers on the ceiling in front of the listening position.
  • Page 29 Speaker Installation „ 5.1.2 Channel System Top Speakers High Speakers a: 22° to 30° b: 120° a: 30° to 55° 3´ (0.9 m) b: 65° to 100° or more c: 125° to 150° 3´ (0.9 m) or more TFL, TFR Fit top front speakers on the ceiling in front of the listening position. TML, TMR Fit top middle speakers on the ceiling directly above the listening position.
  • Page 30 Speaker Connections (Before starting the procedure) Speaker Connections and "Speaker Impedance" Settings 4-16 3.1 Channel System 33, 34, 35, 36 Speaker Connections 5.1 Channel System 37, 38, 39, 40 7.1 Channel System 41, 42 3.1.2 Channel System 43, 44, 45, 46 5.1.2 Channel System 47, 48 3.1ch...
  • Page 31 Speaker Connections Speaker Connections and "Speaker Impedance" Settings Connections „ (Note) Speaker Impedance Connect speakers with an impedance of 4 Ω to 16 Ω. If any of the speakers to be connected has an impedance of 4 Ω or more and less than 6 Ω, set "Speaker Impedance"...
  • Page 32 Speaker Connections „ Connect the Subwoofer a Subwoofer cable Connect a powered subwoofer with this unit using a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each SUBWOOFER PRE OUT jack. 3.1ch 5.1ch 7.1ch 3.1.2ch...
  • Page 33 Speaker Connections „ 3.1 Channel System 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch...
  • Page 34 Speaker Connections „ 3.1 Channel System + ZONE SPEAKER (North American and Taiwanese models) MAIN ROOM ZONE 2 FL(Z2) FR(Z2) 3.1ch FR(Z2) FL(Z2) 5.1ch 7.1ch ‰ 3.1 Channel System + ZONE SPEAKER 3.1.2ch (European, Australian and Asian models) 5.1.2ch p35)
  • Page 35 Speaker Connections „ 3.1 Channel System + ZONE SPEAKER (European, Australian and Asian models) MAIN ROOM ZONE 2 FL(Z2) FR(Z2) 3.1ch FR(Z2) FL(Z2) 5.1ch 7.1ch 3.1.2ch 5.1.2ch...
  • Page 36 Speaker Connections „ 3.1 Channel System (Bi-Amping the Speakers) For high- frequency 3.1ch For low- frequency 5.1ch Be sure to remove the jumper bar connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction manual of your speakers as well.
  • Page 37 Speaker Connections „ 5.1 Channel System 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch...
  • Page 38 Speaker Connections „ 5.1 Channel System + ZONE SPEAKER (North American and Taiwanese models) MAIN ROOM ZONE 2 FL(Z2) FR(Z2) 3.1ch FR(Z2) FL(Z2) 5.1ch 7.1ch ‰ 5.1 Channel System + ZONE SPEAKER 3.1.2ch (European, Australian and Asian models) 5.1.2ch p39)
  • Page 39 Speaker Connections „ 5.1 Channel System + ZONE SPEAKER (European, Australian and Asian models) MAIN ROOM ZONE 2 FL(Z2) FR(Z2) 3.1ch FR(Z2) FL(Z2) 5.1ch 7.1ch 3.1.2ch 5.1.2ch...
  • Page 40 Speaker Connections „ 5.1 Channel System (Bi-Amping the Speakers) For high- frequency 3.1ch For low- frequency 5.1ch Be sure to remove the jumper bar connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction manual of your speakers as well.
  • Page 41 Speaker Connections „ 7.1 Channel System 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch...
  • Page 42 Speaker Connections „ 7.1 Channel System + ZONE SPEAKER (North American and Taiwanese models) MAIN ROOM ZONE 2 FL(Z2) FR(Z2) 3.1ch FR(Z2) FL(Z2) 5.1ch While ZONE 2 playback is being performed, surround back speakers installed in the main room cannot play audio. 7.1ch 3.1.2ch 5.1.2ch...
  • Page 43 Speaker Connections „ 3.1.2 Channel System 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch...
  • Page 44 Speaker Connections „ 3.1.2 Channel System + ZONE SPEAKER (North American and Taiwanese models) MAIN ROOM ZONE 2 FL(Z2) FR(Z2) 3.1ch FR(Z2) FL(Z2) 5.1ch 7.1ch ‰ 3.1.2 Channel System + ZONE SPEAKER 3.1.2ch (European, Australian and Asian models) 5.1.2ch p45)
  • Page 45 Speaker Connections „ 3.1.2 Channel System + ZONE SPEAKER (European, Australian and Asian models) MAIN ROOM ZONE 2 FL(Z2) FR(Z2) 3.1ch FR(Z2) FL(Z2) 5.1ch 7.1ch 3.1.2ch 5.1.2ch...
  • Page 46 Speaker Connections „ 3.1.2 Channel System (Bi-Amping the Speakers) For high- frequency 3.1ch For low- frequency 5.1ch 7.1ch Be sure to remove the jumper bar connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction manual of 3.1.2ch your speakers as well.
  • Page 47 Speaker Connections „ 5.1.2 Channel System 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.2ch...
  • Page 48 Speaker Connections „ 5.1.2 Channel System + ZONE SPEAKER (North American and Taiwanese models) MAIN ROOM ZONE 2 FL(Z2) FR(Z2) 3.1ch FR(Z2) FL(Z2) 5.1ch 7.1ch While ZONE 2 playback is being performed, height speakers installed in the main room cannot play audio. 3.1.2ch 5.1.2ch...
  • Page 49 Speaker Connections Connecting a Power Amplifier (For European, Australian and Asian models) Power amplifier You can connect a power amplifier to the unit and use the unit as a pre-amplifier in order to produce a large volume that cannot be output with the unit only. Connect the front speakers to the power amplifier.
  • Page 50 Connections Connecting the TV SUB Monitor Connecting Playback Devices Connecting an AV Component in a Separate Room (Multi-zone Connection) Connecting Antennas Network Connection Connections Connecting the Power Cord...
  • Page 51 Connections Connecting the TV By connecting a TV to this unit, you can show the video from AV devices connected to this unit on the TV and also play the sound from the TV through this unit. To ARC/eARC TV IN(ARC) If the TV supports the ARC (Audio Return Channel) function(*), use only the HDMI cable to connect with the TV.
  • Page 52 Connections Connecting the SUB Monitor SUB Monitor This unit has multiple HDMI OUT jacks, and another TV or projector can be connected to the HDMI OUT SUB jack. • Switch between MAIN and SUB using the HDMI MAIN/SUB button on the remote controller ( →p15) or "Quick Menu"...
  • Page 53 Connections Connecting Playback Devices Connecting an AV Component with HDMI Jack Mounted This is a connection example of an AV component equipped with an HDMI jack. When connecting with an AV component that conforms to the CEC (Consumer Electronics Control) standard, you can use the HDMI CEC function (*) that enables linking with input selectors, etc.
  • Page 54 Connections Connecting an Audio Component This is a connection example of an audio component. Connect a CD player using an analog audio cable. You can also connect a turntable that has an MM- type cartridge to the PHONO jack. • If the turntable has a built-in phono equalizer, connect it to any of the AUDIO IN jacks other than the PHONO jack.
  • Page 55 Connections Connecting an AV Component in a Separate Room (Multi-zone Connection) Connecting a TV (ZONE 2) While a disc is played on a Blu-ray Disc player in the main room (where this unit is located), you can play the video and audio of the same Blu-ray Disc player or another AV component on the TV equipped with an HDMI IN jack in a separate room (ZONE 2).
  • Page 56 Connections Connecting an Integrated Amplifier (ZONE 2) You can enjoy 2 ch audio in the separate room (ZONE 2) while performing playback in the main room (where this unit is located). Use an analog audio cable to connect the ZONE 2 LINE OUT terminal on this unit to the input jack on an integrated amplifier in the separate room.
  • Page 57 Connections Connecting Antennas North American, Taiwanese, Australian and Asian models Connect the antenna to this unit, and set up the antenna at the best position for listening while receiving radio signals. Attach the indoor FM antenna to the wall (North American, using push pins or adhesive tape.
  • Page 58 Connections Network Connection This unit can be connected to the network using a wired LAN or Wi-Fi (wireless LAN). You can enjoy network functions such as Internet radio by network connection. If connection is made by the wired LAN, connect the router and the ETHERNET jack with the Ethernet cable as shown in the illustration.
  • Page 59 Connections Connecting the Power Cord Connect the power cord after all the connections are completed. • This model includes a removable power cord. Be sure to connect the power cord to the AC INLET of the unit first, and then connect it to the outlet. Always disconnect the outlet side first when disconnecting the power cord.
  • Page 60 Playback Basic Operations AV Component Playback BLUETOOTH Playback ® Listening To the Radio Listening Mode Quick Menu Network Services Playback Spotify AirPlay ® DTS Play-Fi ® Amazon Alexa Amazon Music Connecting the Sonos System for Playback Internet Radio Convenience functions Multi-zone Playing different audio and video USB Storage Device...
  • Page 61 Playback AV Component Playback You can play the audio from AV components, such as Blu-ray disc players through this unit. • When a TV is connected to the HDMI OUT SUB jack, use the HDMI MAIN/SUB button or "Quick Menu" ( →p73) to switch between MAIN and SUB. Basic Operations Perform the following procedure when this unit is on.
  • Page 62 If a password is requested, enter "0000". • This unit is displayed as "Onkyo TX-NR6100 XXXXXX". This display The illustration shows an image. can be changed using the Friendly Name function ( →p123) or Onkyo Controller ( →p137) (available on iOS or Android™).
  • Page 63 Playback Transmitting audio from this unit to BLUETOOTH wireless technology enabled devices Pairing 1. Press the input selector you want to play. • Select a source other than "BLUETOOTH". This function does not work if you select "BLUETOOTH". • This function can be used in one location, either the main room (where this unit is located) or a separate room (ZONE 2).
  • Page 64 Playback Playing Back 1. Do the play operations on the AV component connected to this unit. Do the play operations on this unit when the input is TUNER or NET. You cannot adjust the volume of the BLUETOOTH wireless technology enabled device on this unit.
  • Page 65 Playback Listening To the Radio You can receive AM (North American, Australian, Taiwanese and Asian models)/FM/DAB (European models) radio stations on this unit with the built-in tuner. Listening To the AM/FM Radio Tuning into a Radio Station Perform the following procedure when this unit is on. „...
  • Page 66 Playback Using RDS (European, Australian and Asian „ Tuning Manually models) Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception. RDS stands for Radio Data System, and is a method of transmitting data in FM 1.
  • Page 67 Playback • If no stations are found, the message "Not Found" is displayed. • Unusual characters may be displayed when the unit receives unsupported characters. This is not a malfunction. Also, if the signal from a station is weak, information may not be displayed. ‰...
  • Page 68 Playback Listening To DAB Digital Radio (European models only) Tuning into a Radio Station Perform the following procedure when this unit is on. 1. Press TUNER repeatedly to select "DAB". • The very first time you select DAB, the Auto Tuning function automatically scans the DAB Band 3 for the multiplexes (i.e., stations) available in your area.
  • Page 69 Playback „ Changing the order stations are displayed You can sort the available stations alphabetically or by multiplex. 1. Press MODE repeatedly to set the method for sorting the display order from the following. Alphabet (default setting): Sort stations alphabetically. Multiplex: Sort stations by multiplex.
  • Page 70 Playback Presetting a Radio Station „ Registration Procedure „ Selecting a Preset Radio Station You can preset up to 40* of your favorite radio stations. 1. Press TUNER. *North American, Australian, Taiwanese and Asian models: AM and FM stations 2. Press the cursors to select a preset number.
  • Page 71 Playback Listening Mode This unit is equipped with a variety of listening modes, and you can select the optimum listening mode for movies, TV, music, and games by pressing MOVIE/TV, MUSIC, and GAME. ( →p154) • For details of the effects of each listening mode, refer to "Listening Mode Effects" ( →p160). •...
  • Page 72 Playback Checking the input format and listening mode Repeatedly pressing the button on the remote controller switches the display of the main unit in the following order. • The display content for the BLUETOOH input is different. • Not all the information is necessarily displayed. Input source and volume Listening mode Input format...
  • Page 73 Playback Quick Menu Menu operations You can quickly adjust the settings you frequently use, such as tone adjustments, etc. You can make the settings on the TV screen during playback. Press Q on the remote controller to display the Quick Menu. Quick Menu BD/DVD HDMI...
  • Page 74 Playback „ HDMI Stereo Assign: This function enables you to select a pair of speakers to output stereo sound. Apart from the front speakers (Front), you can select the Surround HDMI Out: Select the HDMI OUT jack to output video signals from "MAIN", speakers (Surround), Surround Back speakers (Surround Back), and Height "SUB", and "MAIN+SUB".
  • Page 75 Playback „ Room EQ It cannot be set if the listening mode is Pure Audio or Direct. AccuEQ: Enable or disable the equalizer function that corrects for sound distortion caused by the acoustic environment of the room. On (All Ch): EQ that corrects according to the room acoustics acquired with the AccuEQ calibration is applied to all channels.
  • Page 76 Playback Spotify Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how.
  • Page 77 Confirm that this unit and the PC are connected to the same network beforehand. Then, press NET on the remote controller. Next, click the AirPlay icon in iTunes, select this unit from the displayed devices, and start play of a music file. iPhone Onkyo TX-NR6100 XXXXXX e.g., iOS 10...
  • Page 78 • Due to the characteristics of AirPlay wireless technology, the sound produced iPhone on this unit may slightly be behind the sound played on the AirPlay-enabled Onkyo TX-NR6100 XXXXXX device. Onkyo XXXXXXXX You can also play the music files on a PC with iTunes (Ver. 12.8 or later) Onkyo XXXXXXXX equipped.
  • Page 79 "Group playback" that plays the same music in https://www.onkyo.com/playfi/info_o.html separate rooms at home. To enjoy this function, download Onkyo Music Control • To use a music streaming distribution service, user registration may be App (available on iOS or Android™).
  • Page 80 Refer to "Onkyo Controller" ( →p137) for information about the app. 2. Start Onkyo Controller and tap the unit when displayed. 3. Tap "NET" or "NETWORK" at the top of the Onkyo Controller screen, and after switching to the network menu, tap the "amazon alexa" icon.
  • Page 81 Operating this unit (*1) Log in using the same account as other terminals with Amazon Alexa. 7. When registration is finished, the screen returns to the one for Onkyo Controller. Follow the on screen instructions and talk to the terminal with You can use voice commands to adjust the volume on this unit, start and stop Amazon Alexa (an Amazon Echo, etc.), and confirm that you can use voice...
  • Page 82 Playback Amazon Music Registering This Unit with Amazon Music 1. Register with the Amazon account on Onkyo Controller. This cannot be set with operations on this unit. Refer to "Onkyo Controller" ( →p137) for information about the app. 2. Start Onkyo Controller and tap the unit when displayed.
  • Page 83 Playing Amazon Music using the Onkyo Controller 1. Start up Onkyo Controller. This unit is automatically displayed after startup. Then, tap and select this unit displayed. 2. Tap "NET" or "NETWORK" on the upper part of the screen to switch to the network screen.
  • Page 84 Playback Connecting the Sonos System for Playback How to Connect This Unit and Sonos Connect 1. Connect the Sonos Connect to the AUDIO IN jack of this unit with the RCA audio cable supplied with the Sonos Connect. Any input jacks other than the PHONO jack can be used.
  • Page 85 Playback cannot find the Sonos Connect to be interlocked, return to the previous screen, turn off the product you do not want to interlock, and try again. Output Zone: With the cursors / , select the ZONE where you want to listen to the music.
  • Page 86 Playback Internet Radio By connecting this unit to an Internet-connected network, you can enjoy Internet radio services such as TuneIn Radio. • To play Internet radio services, the network needs to be connected to the Internet. • Depending on the Internet radio service, a user registration may be required on your PC beforehand. For details of each service, visit the website of each service. Playing Back Perform the following procedure when this unit is on.
  • Page 87 Playback Internet Radio Service Menu You can bookmark specific stations, or delete stations that have been bookmarked. The displayed menu varies according to the service being selected. The menu icon is displayed while a station is being played. When only this icon is displayed, pressing ENTER will display the menu on the screen.
  • Page 88 Using Onkyo Controller ( →p137) is convenient for operations of multi-zone playback. You can use it on mobile devices, such as a smartphone and tablet to which Onkyo Controller (available on iOS or Android™) has been downloaded.
  • Page 89 Playback Playing Back In remote controller operation, while pressing and holding the ZONE 2 SHIFT button, press other buttons for operation. 1. While pressing and holding the ZONE 2 SHIFT button on the remote controller, point the remote controller at this unit and press . •...
  • Page 90 Playback • DSD audio signals cannot be output to ZONE 2 with the "NET" input selector. • If ZONE 2 is on, power consumption during standby will increase. • If ZONE 2 is turned on when the Pure Audio listening mode is selected in the main room, the mode will automatically switch to the Direct listening mode.
  • Page 91 Playback Playing different audio and video Displaying Your Favorite Video on TV While Playing Music While listening to the music from a CD or BLUETOOTH enabled device, you can display video on TV from an AV component such as a Blu-ray Disc player. •...
  • Page 92 Playback Setting the video source to be displayed on TV beforehand: When playing the audio of "TUNER", "NET" and "BLUETOOTH", you can set the input selector to be displayed on TV beforehand using "Video Select" ( →p119) on the Setup Menu.
  • Page 93 Playback USB Storage Device You can play music files stored on a USB storage device. Supported Audio Formats USB Storage Device Requirements MP3 (.mp3) • This unit can use USB storage devices that comply with the USB mass • MPEG-1/MPEG-2 Audio Layer 3/44.1 kHz, 48 kHz/Between 8 kbps and 320 kbps, storage class standard.
  • Page 94 Playback Playing music files saved on a USB storage device Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. 2. Plug your USB storage device with the music files into the USB port either on the front panel or rear panel of this unit.
  • Page 95 Playback • When playing files recorded with VBR (Variable bit-rate), the playback time may not be displayed correctly. • This unit supports the gapless playback of the USB storage device in the following conditions. When continuously playing WAV, FLAC and Apple Lossless files with the same format, sampling frequency, the number of channels and quantization bit rate.
  • Page 96 Playback Music Server Streaming play of music files stored on PCs or NAS devices connected to the same network as this unit is supported. • The network servers this unit is compatible with are those PCs with players installed that have the server functionality of Windows Media Player 12, or NAS that ®...
  • Page 97 Playback Playing Back Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. TV’s REMOTE 2. Start the server (Windows Media Player 12 or NAS device) containing the ®...
  • Page 98 Playback Controlling Remote Playback from a PC 6. Select the target server with the cursors, and press ENTER to display the items list screen. You can use this unit to play music files stored on your PC by operating the PC •...
  • Page 99 ", "Play Next " or "Play Last " icon to add the the outlet. Refer to "Onkyo Controller" ( →p137) for information about the app. track to Play Queue. Adding Play Queue Information • If there are no tracks on the Play Queue list, only "Play Now "...
  • Page 100 Playback 2. Tap the " " icon of the track to sort, and drag the icon to the destination. 3. To delete a track, slide the track to the left until the trash icon changes to " ". If the device is on iOS, slide the " "...
  • Page 101 Playback Connecting a transmitter for playback When you connect wireless headphones or a wireless speaker transmitter to the ZONE B LINE OUT terminal of this unit, you can play back the same source through the wireless headphones or wireless speakers as in the main room. Connections Setting Up 1.
  • Page 102 Playback • If "On (A+B)" is selected as an audio output destination, you can select only the "Stereo" listening mode for ZONE A when using the 2.1 ch speaker layout. When using a speaker layout of 3.1 ch or more, you can select only the "AllCh Stereo"...
  • Page 103 Setup Use the on-screen displays (OSD) that appear on the TV to make the settings. Press on the remote controller to display the Setup menu. Setup 1. Input/Output Assign 1. TV Out / OSD 2. Speaker 2. HDMI Input 3. Audio Adjust 3.
  • Page 104 Setup Setup Menu Menu list 1. Input/Output Assign 1. TV Out / OSD Make settings for TV output and On-Screen Displays (OSD) that appear on the TV. p106 2. HDMI Input You can change input assignment between the input selectors and HDMI IN jacks. p108 3.

  • Page 105: Firmware Update

    Setup 4. Source 1. My Input Volume Set a volume value for each input selector. p118 2. Name Edit Set an easy name for each input. p118 Audio Select Select the prioritized input terminal when multiple audio sources are connected to one input p118 selector.
  • Page 106 Setup Setup 1. Input/Output Assign 1. Input/Output Assign „ 1. TV Out / OSD ‰ 1080p -> 4K Upscaling (Default Value: Off) When a TV supporting 4K is used, video signals input with 1080p can be Make settings for TV output and On-Screen Displays (OSD) that appear on the automatically output with 4K.
  • Page 107 Setup Setup 1. Input/Output Assign ‰ HDMI 4K/8K Signal Format (Default Value: 4K Standard) ‰ Zone 2 HDMI (Default Value: Not Use) Set the 4K/8K signal format input and output by this unit. Set to suit the TV or Make the setting when you output to the Zone 2 TV connected to the HDMI OUT player connected.
  • Page 108 Setup Setup 1. Input/Output Assign „ 2. HDMI Input ‰ Mini Player OSD (Default Value: Always On) You can display on the TV the images from another input selected last while You can change input assignment between the input selectors and HDMI IN playing the audio from NET or BLUETOOTH input.
  • Page 109 Setup Setup 1. Input/Output Assign „ 3. Digital Audio Input „ 4. Analog Audio Input Change input assignment between the input selectors and DIGITAL IN Change input assignment between the input selectors and AUDIO IN jacks. If COAXIAL/OPTICAL jacks. If you do not assign a jack, select "---". you do not assign a jack, select "---".
  • Page 110 Setup Setup 2. Speaker 2. Speaker „ 1. Configuration ‰ Zone 2 Lineout (Default Value: Zone 2) Set an output destination of the audio output from ZONE 2 LINE OUT/ZONE B Change the settings of connection environment of the speakers. LINE OUT jack.
  • Page 111 Setup Setup 2. Speaker „ 2. Crossover Surround Back: Select the crossover frequency from "40 Hz" to "200 Hz" to start outputting Change the settings of crossover frequencies. frequencies for each channel. • As for the THX-certified speakers, the following settings are recommended. "Full Band": Full band will be output.
  • Page 112 Setup Setup 2. Speaker „ 3. Distance „ 4. Level Calibration Set the distance from each speaker to the listening position. Adjust the volume level of each speaker. ‰ Front Left (Default Value: 12.0 ft/3.60 m) ‰ Front Left (Default Value: 0.0 dB) Center (Default Value: 12.0 ft/3.60 m) Center...
  • Page 113 Setup Setup 2. Speaker „ 5. Dolby Enabled Speaker „ 6. Equalizer Settings Change the settings of Dolby Enabled Speakers. You can adjust the output volume of the range for each connected speaker. • This setting can be selected when "Configuration" - "Height Speaker" is set to Adjust the volume of different sound ranges for each speaker.
  • Page 114 Setup Setup 2. Speaker „ 7. THX Audio ‰ BGC (Default Value: Off) Correct an emphasized bass sound when listening to music near the wall or Change the THX Audio settings. boundary of the room due to layout limitation of the listening room. The THX ‰...
  • Page 115 Setup Setup 2. Speaker „ 8. Speaker Virtualizer The Speaker Virtualizer function can be switched between On and Off. ‰ Speaker Virtualizer (Default Value: On) Listening modes such as T-D that have virtual speaker effects can be selected. Listening modes such as T-D that have virtual speaker effects cannot be selected.
  • Page 116 Setup Setup 3. Audio Adjust 3. Audio Adjust „ 1. Multiplex/Mono „ 2. Dolby Change the settings of multiplex audio playback. Change the setting of when Dolby signals are input. ‰ Multiplex Input Channel (Default Value: Main) ‰ Loudness Management (Default Value: On) Set the audio channel or language to be output when playing multiplex audio or When playing Dolby TrueHD, enable the dialog normalization function which multilingual broadcasts, etc.
  • Page 117 Setup Setup 3. Audio Adjust „ 4. LFE Level ‰ Power On Volume (Default Value: Last) Set the low-frequency effect (LFE) level for Dolby Digital series, DTS series, Set the volume level of when the power is turned on. Select a value from "Last" Multichannel PCM, and DSD signals.
  • Page 118 Setup Setup 4. Source 4. Source „ 1. My Input Volume • This cannot be set if the "NET" or "BLUETOOTH" input is selected. „ Audio Select Set a volume value for each input selector. ‰ My Input Volume (Default Value: Last) Select the priority for input selection when multiple audio sources are connected to one input selector, such as connections to both the "BD/DVD"...
  • Page 119 Setup Setup 4. Source „ Video Select OPTICAL When giving priority to input signal from DIGITAL IN OPTICAL jacks When "TUNER", "NET", or "BLUETOOTH" input is selected, you can set the • This item can be selected only when the input to be set input from which video is displayed on the TV.
  • Page 120 When this function is used When "Last" is selected, you can switch the input of the unit When this function is not used using the remote controller or the Onkyo Controller even in the standby mode. Auto, Select one of these settings when you have connected Auto (Eco) equipment that conforms to the CEC standard.
  • Page 121 Setup Setup 5. Hardware ‰ Audio TV Out (Default Value: Auto) ‰ Audio Return Channel (eARC supported) (Default Value: On) You can enjoy audio through the speakers of the TV while this unit is on. You can enjoy the sound of an HDMI-connected ARC-compatible TV or eARC- •...
  • Page 122 Setup Setup 5. Hardware „ 2. Network ‰ DHCP (Default Value: Enable) Change the settings of the Network function. Enable Auto configuration by DHCP • When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure Disable Manual configuration without DHCP the setting automatically.
  • Page 123 5. Hardware ‰ Friendly Name (Default Value: Onkyo TX-NR6100 XXXXXX) ‰ AirPlay Device Name (Default Value: Onkyo TX-NR6100 XXXXXX) Change the model name of this unit which is displayed on the device Change the model name of this unit which is displayed on the AirPlay- connected to the network to an easily recognized name.
  • Page 124 Setup Setup 5. Hardware ‰ AirPlay Password (Default Value: -) ‰ Privacy Statement (Default Value: Not Accepted) You can set a password of up to 31 characters so that only users that have When using a network service that requires a login name, email address, input can use AirPlay.
  • Page 125 Setup Setup 5. Hardware „ 3. Bluetooth ‰ Pairing Information (Default Value: -) You can initialize the pairing information stored on this unit. If you are no longer Change the settings for the BLUETOOTH function. able to connect with a device you have paired, try doing this. ( →p145) •...
  • Page 126 Setup Setup 5. Hardware ‰ Search Devices (Default Value: -) ‰ Device (Default Value: -) Search for a BLUETOOTH wireless technology enabled device that is able to Displays the name of the BLUETOOTH enabled device connected to the unit. receive the audio from this unit. Select "Start" then press ENTER. A list of the •...
  • Page 127 • Default values vary depending on the regions. application such as Onkyo Controller that can control this unit. • When this function is set to "On", the power consumption in standby state The unit will automatically enter standby mode ("AUTO STBY"...
  • Page 128 Setup Setup 5. Hardware „ 5. Works with SONOS ‰ Bluetooth Wakeup (Default Value: Off) This function wakes up the unit on standby by connecting a BLUETOOTH Change the settings to connect with the Sonos Connect. enabled device. (SONOS-1/SONOS-2) When this function is used ‰...
  • Page 129 Setup Setup 5. Hardware ‰ Preset Volume (Default Value: Main=Last / Zone 2=Last) You can set the volume beforehand for playing back the Sonos Connect. You can set volumes for the main room (where this unit is located) and separate room (ZONE 2) respectively.
  • Page 130 Setup Setup 6. Multi Zone 6. Multi Zone „ 1. Zone 2 „ 2. Remote Play Zone Change the settings for Zone 2. Change the settings for remote play. ‰ Maximum Volume (Default Value: Off) ‰ Remote Play Zone (Default Value: Auto) When playing with AirPlay or Spotify Connect, or when using the Music Server Set the maximum value for Zone 2 to avoid too high volume.
  • Page 131 Select "10 kHz" or "9 kHz". • When this setting is changed, all radio presets are deleted. If multiple ONKYO products are installed in the same room, select the ID for the remote control used with this unit from "1", "2" and "3" to prevent ‰...
  • Page 132 Setup Setup 7. Miscellaneous „ 3. Firmware Update „ 5. Lock Change the settings for Firmware Update. Lock the Setup menu so that the settings cannot be changed. ‰ Update Notice (Default Value: Enable) ‰ Setup Parameter (Default Value: Unlocked) Availability of a firmware update is notified via network.
  • Page 133 Setup Web Setup Menu operations Device Information You can make the settings for the network function of this unit using an Internet browser on a PC, smartphone, etc. You can change the Friendly Name or AirPlay Device Name, set an AirPlay Password, etc.
  • Page 134 Setup Initial Setup with Auto Start-up Wizard Operations When you turn the unit on for the first time after purchase, the Initial Setup screen is automatically displayed on the TV to allow you to make settings TV’s REMOTE required for startup using simple operations following on-screen guidance. Inputs 1.
  • Page 135 Setup „ Network Connection Keyboard Input 1. A confirmation screen asking you whether to agree to the privacy statement To switch between upper and lower cases, select "A/a" on the screen, and press is displayed during network setting. If you agree, select "Accept" and press ENTER on the remote controller.
  • Page 136 Setup 1. Place the supplied speaker setup microphone at the listening position, and press ENTER. connect it to the SETUP MIC jack on the main unit. „ 2. Multi Zone Sound Check Output test tones to ZONE 2 to enjoy audio in a separate room (ZONE 2) in addition to the main room.
  • Page 137 (internet radio or play of a music file) without looking at the TV. • To use Onkyo Controller, this unit needs to be connected to the same network as the mobile device.
  • Page 138 Troubleshooting Troubleshooting „ Listening Modes „ Video Before starting the procedure „ Linked operation Problems may be solved by simply turning the power on/off or disconnecting/ „ Tuner connecting the power cord, which is easier than working on the connection, setting and operating procedure.
  • Page 139 Troubleshooting When the unit is operating erratically ‰ Try restarting the unit ‰ Resetting the unit (this resets the unit settings to the default) Restarting this unit may solve the problem. Set the main unit to standby, then after waiting for 5 seconds or more, press and hold the ON/STANDBY button If the restart of the unit does not solve the problem, reset the unit, and restore of the main unit for at least 5 seconds, and then restart the unit.

  • Page 140: Troubleshooting

    Troubleshooting Troubleshooting „ Power ‰ When the power is turned on, "AMP Diag Mode" appears on the display of the main unit. • The protection circuit function may have operated. If the unit suddenly enters the standby state and "AMP Diag Mode" appears on the display of the main unit when the power is turned on again, this function is diagnosing whether or not the main unit is malfunctioning or there is an abnormality with the speaker cable connection.
  • Page 141 Troubleshooting ‰ No sound from the TV • Change the input selector on this unit to the position of the terminal to which the TV is connected. • If the TV doesn't support the ARC function, along with connection by HDMI, connect the TV and this unit using a digital optical cable. ( →p51) ‰...
  • Page 142 Troubleshooting ‰ Noise can be heard • Using cable ties to bundle audio pin cables, power cords, speaker cables, etc. may degrade the audio performance. Do not bundle the cords. • An audio cable may be picking up interference. Change the position of the cables. ‰...
  • Page 143 Troubleshooting ‰ About Dolby signals • When surround back speakers are included in the speaker layout, and software that is recorded with the 5.1-channel Dolby audio format is played, the surround channel audio may be output from the surround back speakers. •...
  • Page 144 Troubleshooting ‰ No image from a device connected to HDMI IN jack • To display video from the connected player on the TV while the unit is in standby, you need to enable "5. Hardware" - "HDMI" - "HDMI Standby ( →p120) Through"...
  • Page 145 Troubleshooting „ Tuner ‰ Poor reception or much noise • Recheck the antenna connection. ( →p57) • Move the antenna away from the speaker cord or power cord. • Move the unit away from your TV or PC. • Passing cars or airplanes in the vicinity can cause interference. •...
  • Page 146 Troubleshooting ‰ Cannot connect this unit to a BLUETOOTH wireless technology enabled device (wireless headphones, etc.) • Check if the BLUETOOTH function of the BLUETOOTH enabled device is enabled. ( →p126) • Initialize the pairing information and perform pairing again. Firstly delete all the pairing information saved on this unit.
  • Page 147 Troubleshooting „ Network function • If you cannot select a network service, start up the network function to select it. It may take approx. one minute to start it up. • When the NET indicator is blinking, this unit is not properly connected to the home network. •...
  • Page 148 Troubleshooting „ USB storage device ‰ USB storage device is not displayed • Check if the USB storage device or USB cable is securely inserted to the USB port of the unit. ( →p93) • Disconnect the USB storage device once from the unit, and then reconnect it. •...
  • Page 149 Troubleshooting „ ZONE B function ‰ Cannot output audio to ZONE B • To output audio to ZONE B, set the audio output destination for "Audio" - "Zone B" on Quick menu to "On (A+B)" or "On (B)" and also set ( →p101) "2.
  • Page 150 Troubleshooting „ Others ‰ Strange noise can be heard from the unit • If you have connected another device to the same outlet as this unit, strange noise may occur under the influence of the device. If the symptom is remedied by removing the power plug of the other device from the outlet, use different outlets for this unit and the device. ‰...
  • Page 151 Appendix Speaker Layouts and Selectable Listening Modes See the following table for selectable listening modes for each speaker layout. Speaker layout (ch) Listening mode 2.1.2 3.1.2 4.1.2 5.1.2 (*1) (*1) (*1) (*2) (*2) (*2) (*2) (*2) DD (Dolby Audio - DD) (*1) (*1) (*1)
  • Page 152 Appendix Speaker layout (ch) Listening mode 2.1.2 3.1.2 4.1.2 5.1.2 (*3) (*3) (*3) ES Discrete (DTS-ES Discrete) ES Matrix (DTS-ES Matrix) DTS 96/24 (*3) (*3) (*3) DTS-HD HR (DTS-HD High Resolution) DTS-HD Master (DTS-HD Master Audio) DTS Express DTS:X DTS Neural:X DTS Virtual:X...
  • Page 153 Appendix Speaker layout (ch) Listening mode 2.1.2 3.1.2 4.1.2 5.1.2 Multich (Multichannel) (*1) (*1) (*1) (*1) (*1) (*3) (*3) (*3) (*1) (*1) (*1) (*2) (*2) (*2) (*2) (*2) Pure Audio (*1) (*1) (*1) (*1) (*1) (*1) (*1) (*1) (*1) Direct (*1) (*1) (*1)
  • Page 154 Appendix LISTENING MODE buttons and Selectable Listening Modes Refer to the following table for the listening modes that can be selected with each listening mode button. LISTENING MODE buttons LISTENING MODE buttons Listening mode MOVIE/TV MUSIC GAME Listening mode MOVIE/TV MUSIC GAME DD (Dolby Audio - DD)
  • Page 155 Appendix LISTENING MODE buttons Listening mode MOVIE/TV MUSIC GAME THX Games THX Sel Games Orchestra Unplugged Studio-Mix TV Logic Unplugged Game-RPG Game-Action Game-Rock Game-Sports AllCh Stereo Mono Music T-D (Theater-Dimensional)
  • Page 156 Appendix Input Formats and Selectable Listening Modes You can select a variety of listening modes Listening mode DTHD according to the audio format of the signal to be Pure Audio DSur (Dolby Audio (Dolby Atmos input. Direct (Dolby Audio (Dolby Audio - DD+) Audio - (*13)
  • Page 157 Appendix Listening mode DTS-HD HR DTS-HD ES Discrete ES Matrix DTS 96/24 (DTS-HD High Master (DTS- (DTS-ES DTS (*2) Express (DTS-ES DTS:X Neural:X Virtual:X (*2) Resolution) HD Master Discrete) (*2) Matrix) (*5) (*6) (*9) (*10) Input format (*2) Audio) (*2) (*5) 2-channel signal input Analog / PCM...
  • Page 158 Appendix Listening mode Orchestra/ Unplugged/ AllCh THX Select T-D (Theater- Studio-Mix/ TV Logic/ Game- Stereo / Cinema/ Music/ (Multich Mono Dimensional) (*2)(*12) Action/ Game-Rock/Game- Mono Music Music/ Cinema/ PCM) (*2) (*9) Input format RPG/ Game-Sports (*7) (*8) Games (*11) Games (*5) 2-channel signal input Analog / PCM Music file / DSD (*1)
  • Page 159 Appendix (*1) You cannot select any mode other than Pure Audio, Stereo, AllCh Stereo and Mono Music if the sampling rate is 5.6/11.2 MHz. (*2) A center speaker or surround speakers need to be installed. (*3) If the input source is Blu-ray Disc and the speaker layout is 5.1 ch or less, DD+ cannot be selected. Instead, the listening mode for DD can be selected. (*4) This can only be selected when no surround back speaker is connected.
  • Page 160 Appendix Listening Mode Effects In alphabetical order speakers and height speakers installed. „ AllCh Stereo • To enable transfer of this audio format, connect via an HDMI cable and set the audio output on the player to Bitstream output. This mode is ideal for background music. Stereo sound is played through the •...
  • Page 161 Appendix „ Direct The Dolby TrueHD audio format is a "lossless" format expanded based on the lossless compression technology referred to as MLP, and it faithfully reproduces This listening mode can be selected for all input signals. Processing that affects the master audio recorded in the studio.
  • Page 162 Appendix „ DTS 96/24 • To enable transfer of this audio format, connect via an HDMI cable and set the audio output on the player to Bitstream output. This mode faithfully reproduces the sound design recorded in the DTS 96/24 „...
  • Page 163 Appendix „ ES Discrete (DTS-ES Discrete) „ Mono Music This mode faithfully reproduces the sound design recorded in the DTS-ES In this mode, all speakers output the same sound in mono, so the sound you Discrete audio format. hear is the same regardless of where you are within the listening room. DTS-ES Discrete is an optional audio format based on 5.1 ch for DVD-Video „...
  • Page 164 Appendix „ T-D (Theater-Dimensional) • Timbre Matching The perception of human ears differs depending on the sound direction. Movie In this mode, you can enjoy a virtual playback of multichannel surround sound theaters have many surround speakers installed, so they are excellent at even with only two or three speakers.
  • Page 165 Appendix Timbre Matching is enabled. – THX Sel Cin (THX Select Cinema): The THX Select Cinema mode provides a high-quality surround sound experience by expanding movie sources recorded in 5.1 ch for 7.1 ch playback. In this mode, the THX ASA processing technology gives smooth transition between side and back surround sounds, creating the best atmosphere and directional sense of surround sound.
  • Page 166 Appendix Speaker Combinations • Up to two powered subwoofers can be connected in either combination. (North American and Taiwanese models) SURROUND ZONE 2 Speaker Channels FRONT CENTER SURROUND HEIGHT Bi-AMP BACK (ZONE SPEAKER) 2.1 ch (*1) (*1) 3.1 ch (*1) (*1) 4.1 ch (*1)
  • Page 167 Appendix (European, Australian and Asian models) SURROUND ZONE 2 Speaker Channels FRONT CENTER SURROUND HEIGHT Bi-AMP BACK (ZONE SPEAKER) 2.1 ch (*1) (*1) 3.1 ch (*1) (*1) 4.1 ch (*1) (*1) 5.1 ch (*1) (*1) 6.1 ch 7.1 ch 2.1.2 ch (*2) (*1) (*2) (*1)
  • Page 168 Appendix General Specifications North American and Amplifier Section European models Australian and Asian models Taiwanese models (North American models) With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than Rated Output Power 7 ch ×...
  • Page 169 Appendix Signal to Noise Ratio 106 dB (IHF-A, LINE IN, SP OUT), 80 dB (IHF-A, PHONO IN, SP OUT) Speaker Impedance 4 Ω - 16 Ω Headphone Rated Output 80 mW + 80 mW (32 Ω, 1 kHz, 10% THD) Supported impedance of Headphones 8 Ω...
  • Page 170 Appendix Line of sight approx. 15 m(*) (*)The actual range will vary depending on factors such as obstacles between devices, magnetic fields around Maximum communication range a microwave oven,static electricity, cordless phone, reception sensitivity, antenna's performance, operating system, software application, etc. North American and HDMI European models...
  • Page 171 Operation has been confirmed on the following devices: (As of April 2020) Toshiba brand televisions; Sharp brand televisions; Onkyo and Integra brand RIHD-compatible players; Toshiba brand players and recorders; Sharp brand players and recorders (when used with a Sharp brand television)
  • Page 172 Appendix North American and Network Section European models Australian and Asian models Taiwanese models Ethernet LAN 1 (10BASE-T/100BASE-TX) Wireless LAN IEEE 802.11 a/b/g/n/ac standard (Wi-Fi standard) 5 GHz/2.4 GHz band ® MP3 (.mp3) • MPEG-1/MPEG-2 Audio Layer-3/44.1 kHz, 48 kHz/Between 8 kbps and 320 kbps, and VBR WMA (.wma) •...
  • Page 173 Appendix North American and USB Section European models Australian and Asian models Taiwanese models 2 (Front : Ver.2.0, 5 V/0.5 A, Rear : Ver.2.0, 5V/1 A) MP3 (.mp3) • MPEG-1/MPEG-2 Audio Layer-3/44.1 kHz, 48 kHz/Between 8 kbps and 320 kbps, and VBR WMA (.wma) •...

  • Page 174: Hdmi Cec ( →P120)

    Appendix Bluetooth Wakeup 1.6 W 1.7 W HDMI CEC 0.10 W 0.15 W Standby mode (ALL ON) 1.7 W 1.8 W 2.7 W 2.8 W Equipment with HiNA functionality Standby This equipment complies with European Commission Regulation (EC) No 1275/2008 as equipment with HiNA mode, Network disconnect and Network functionality.
  • Page 175 Appendix North American and Audio Outputs European models Australian and Asian models Taiwanese models LINE OUT (ZONE 2)(*) × 1 LINE OUT (ZONE 2)(*) × 1 PRE OUT (SUBWOOFER) × 2 Analog PRE OUT (SUBWOOFER) × 2 *Can be changed to LINE OUT *Can be changed to LINE OUT (ZONE B) and PRE OUT (FRONT).
  • Page 176 SN 29403926A_EN © Copyright 2020 Onkyo & Pioneer Corporation Japan. All rights reserved. https://www.onkyo.com/privacy/ F2006-1...