Onkyo TX-NR787 Instruction Manual page 35

„ 5.1 Channel System + ZONE SPEAKER
MAIN ROOM
3
2 1
6
5 4
ZONE 2 ZONE 3
8 7 bk 9
MAIN ROOM: This is a basic 5.1 Channel System. For details of the speaker layout, refer to "Speaker Installation"
( p14).
ZONE 2/ZONE 3: You can enjoy 2-ch audio in the separate room (ZONE 2/ZONE 3) while performing 5.1-ch playback in
the main room (where this unit is located). The same source can be played back in the main room and ZONE 2/ZONE 3
simultaneously. Also, different sources can be played back in both rooms. To output audio from an externally connected AV
component to ZONE 2, use either a digital coaxial cable, digital optical cable or analog audio cable for connection.
( p53)
To output audio from an externally connected AV component to ZONE 3, use an analog audio cable for connection. Note
that ZONE 3 output is not possible with the connection using a HDMI cable, digital coaxial cable, or digital optical cable.
Contents Connections
≫
35
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
"Speaker Setup" settings during
„
Initial Setup ( p138)
Speaker Setup
Speaker Channels 5.1ch < >
Subwoofer Yes
Height 1 Speaker ---
Height 2 Speaker ---
Zone Speaker Zone 2
Bi-Amp No
Select how many speakers you have.
• Speaker Channels: 5.1 ch
• Subwoofer: Yes
• Height 1 Speaker: ---
• Height 2 Speaker: ---
• Zone Speaker: Zone 2 or Zone 2/
Zone 3
• Bi-Amp: No
≫
Next