Solenoid - Samsung ProXpress C3060 Series Service Manual

3.3.19. Solenoid

1. Remove the right cover. (Refer to 3.3.1)
2. Remove 4 screws. And then, release the main board
bracket.
3. Remove the rear cover. (Refer to 3.2.3.)
4. Release the spring. Remove poly-washer. And, remove
the Duplex Swing Gear Assy[A].
5. Remove 2 screws. And then, release the Inlet Assy[B].
Copyright© 1995-2017 SAMSUNG. All rights reserved.
6. Remove 3 screws. And then, release the Holder-TR
Motor DC.
7. Remove 4 screws. And then, release the PH Drive Unit.
8. Remove 1 screw. Unplug the harness. And then,
remove the solenoid.
3. Disassembly and Reassembly
3-22