Assembly; Set Up And Operation - Shop-Vac P11S Series User Manual

Wet/dry vacuum
Table of Contents

Advertisement

Available languages

Available languages

CASTER SYSTEM
Follow the instructions for the caster system that came with your vacuum.
PLASTIC TANK WITh CASTER FEET
You will find four caster feet, four casters and four screws with your vacuum. Assemble as
follows:
1. With cord disconnected from receptacle and tank cover removed, turn tank upside down
so that bottom is facing up.
2. With front of tank facing you, take caster feet marked with the
letter A and place in slots on left front and right rear of tank also marked with the
letter A. Secure with screws provided.
3. Take caster feet marked with the letter B and place in slots on right front and
left rear of tank also marked with the letter B. Secure with screws provided.
4. If flat washers are included in hardware pack place flat washer over stem of caster before installing
casters into feet. NOTE: Flat washers are not required with all units.
5. Insert casters into feet by placing stem of caster into holes provided. Apply
pressure and twisting motion until casters snap into place. Return tank to
upright position.
METAL TANK WITh CASTER DOLLY
You will find four casters with your vacuum. Assemble as follows:
1. With cord disconnected from receptacle and tank cover removed, turn tank upside down
so that bottom is facing up.
2. Insert casters into bottom of dolly by placing stem of caster
into holes provided. Apply pressure and twisting motion until
casters snap into place. Return tank to upright position.
SIDE TANK HANDLES FOR METAL TANK
If your unit came with side tank handles, attach handles to tank with screws
provided.
DANGER
like that tend to produce arcs or sparks that can cause an explosion. Do not pick up flammable,
combustible, or hot materials. Do not use around explosive liquids or vapors, as electrical devices
produce arcs or sparks which can cause a fire or explosion - do not use at filling stations or
anywhere gasoline is stored or dispensed.

ASSEMBLY

SET UP AND OPERATION

This equipment incorporates parts such as switches, motors or the
Screw
Caster
Foot
Screw
Caster
Caster
Foot
Caster
PAGE 5
Caster
Foot

Advertisement

Table of Contents
loading

This manual is also suitable for:

P12s series

Table of Contents