Table of Contents
Advertisement
PROVISIONING – UPGRADE AND CONFIGURATION
<require_100rel>
<use_srtp>
<srtp_secure_signaling>
<codec>
<type>
<name>
<prio>
<dtmf>
<no_vad>
<ec_tail>
<enable_ice>
<enable_relay>
<enable_presence>
<tls>
<tls_password />
<tls_method>
<tls_neg_timeout>
<account>
<valid>
<id>
Specify whether support for reliable provisional response (100rel and
PRACK) should be required by default. Note that this setting can be
Specify default value of secure media transport usage. Note that this
0: SRTP will be disabled, and the transport will reject RTP/SAVP offer.
1: SRTP will be advertised as optional and incoming SRTP offer will be
accepted.
2: The transport will require that RTP/SAVP media shall be used.
Specify whether SRTP requires secure signalling. This option is only used
when use_srtp option above is non-zero. Note that this setting can be
0: SRTP does not require secure signalling
1: SRTP requires secure transport such as TLS
2: SRTP requires secure end-to-end transport (SIPS)
Codec type
Codec name
Codec priority (0-4)
DTMF signalling. Default is 2.
0: In-band
1: SIP message
2: RTP message
Disable VAD. Default is VAD enabled.
Echo canceller tail length, in milliseconds.
Enable ICE?
Enable ICE relay?
Enable the use of presence signalling.
Password for the private key
TLS protocol method from pjsip_ssl_method, which can be:
0: TLS v1.0
1: TLS v1.1
2: TLS v1.2 (Default)
TLS negotiation timeout in seconds to be applied for both outgoing and
incoming connections. If zero, no timeout is used.
If this account information is valid or not.
The full SIP URL for the account.
42
Advertisement
Table of Contents
