Panasonic KX-HDV800 Installation & Administration Manual page 40

PROVISIONING – UPGRADE AND CONFIGURATION
web interface)
doing the settings on each phone)
Use with a Device Management server, see page 4 .
<locale>
<region>
<recording>
<enable>
<logging>
<level>
<log_sip>
<remote_log>
<remote_host />
<network>
<net>
<dhcp>
<ip>
<netmask>
<gateway>
<dns>
<dns>
<hostname>
<domain />
<vlan>
<enable>
<id>
<std_prio_map>
<sip_priority>
<media_priority>
<enable>
<username />
<eap_md5>
<enable>
The phone application logs messages to log facility LOCAL0.
Log level 1–5 (equivalent to Fatal–Trace)
Log SIP messages to log facility LOCAL1. Default is true.
Log messages to a remote log server. Default is false.
Remote log server.
Specify if DHCP should be used to obtain network settings. If so, the
other network settings won't be used.
Specify the IP address of the KX-HDV800.
The netmask of the IP address.
Specify the default gateway to be used.
Specify at most two Domain Name Servers to be used.
Specify host name.
Specify domain name.
Virtual LAN enabled if set to true
VLAN ID.
40