Table of Contents
Advertisement
SETTINGS
Account 1 and Account 2
Enable account
Account name
User
Registrar
Realm
Authentication name The name used for the Realm authentication. This may be the
Password
Registration Interval This is a request to the SIP server for when the registration
On phone:
(MENU) > SETTINGS > ADVANCED > (PIN) > ACCOUNTS (6,2,1).
Nat traversal
rewriting the IP addresses in the IP headers as packets pass from one interface to the
port are rewritten from the private IP address space into the address space on the
outside (Internet).
NAT rewrites the addresses but leaves the packets themselves untouched. This kind
one IP address to another).
NAT traversal solves this problem, providing a "view from the outside" that makes it
possible to replace the IP address in the SIP requests with the address shown on the
It is possible to store account information for future use, but
temporarily disable it.
This is the name displayed on the screen. It can be set according
to company standards.
The account (customer) name.
Shall contain the IP address or the public name of the SIP server
where the account is registered (e.g. 10.10.1.100 for a local SIP
server or sip.company.net for a public VoIP service provider)
any. Can be left blank.
The protection domain where the SIP authentication (name and
password) is valid. This is usually the same as the registrar. If left
blank, or marked with a "*", the phone will respond to any realm.
when asked for credentials.
The password used for the Realm authentication.
within the time interval if the phone is still on and connected to
the server. The default value is 1800 seconds.
20
Advertisement
Table of Contents
