Transfer The Data - Omron HN-290T Instruction Manual

As soon as the measurement is completed, the data will be transferred automatically
as below.
Transferring the data.
Notes:
• When the connection symbol (
being transmitted." in section 6.2 for more detail.
• If SYNC symbol (
30 readings could be stored at most. If the memory is full, the unit will delete the
oldest reading.

4. Transfer the Data

The transfer is completed.
) does not appear, refer the "The data is not
) is displayed, it means 1 or more readings have stored.
12
The unit will automatically
turn off after 10 seconds
without any operations.