Omron HN-290T Instruction Manual page 22

11. Guidance and Manufacturer's Declaration
(Table 1)
Guidance and manufacturer's declaration – electromagnetic emissions
OMRON Digital Weight Scale is intended for use in the electromagnetic
environment specified below. The customer or the user of this OMRON Digital
Weight Scale should assure that it is used in such environment.
Emissions test
RF emissions CISPR 11
RF emissions CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC61000-3-3
(Table 2)
Guidance and manufacturer's declaration – electromagnetic immunity
OMRON Digital Weight Scale is intended for use in the electromagnetic
environment specified below. The customer or the user of this OMRON Digital
Weight Scale should assure that it is used in such environment.
Immunity test
Electrostatic
discharge
(ESD) IEC
61000-4-2
Compliance Electromagnetic environment – guidance
Group 1
Class B
Not
Applicable.
Not
Applicable.
IEC 60601 Compliance
Test level level
±6 kV ±6 kV
contact contact
±8 kV air ±8 kV air
The OMRON Digital Weight Scale uses
RF energy only for its internal function.
Therefore, its RF emissions are very low
and are not likely to cause any interference
in nearby electronic equipment.
The OMRON Digital Weight Scale is
suitable for use in all establishments,
including domestic establishments and
those directly connected to the public low-
voltage power supply network that supplies
buildings used for domestic purposes.
Electromagnetic
environment – guidance
Floor should be wood, concrete,
or ceramic tile. If floors are covered
with synthetic material, the relative
humidity should be at least 30 %.
22