Checking The Last Time Adjustment Result - Casio 5624 Operation Manual

9.
Rotate the crown to move the second
hand to the desired setting for the year
one's digit.
Year (one's digit)
0
1
9
8
7 5
6
10.
Press (C).
This enables the month setting operation.
11.
Rotate the crown to change the month.
12
11 1
10
9
8
7 5
6
Month
12.
Press (C).
The mode hand will move slightly,
indicating that the day setting operation is
enabled.
Changing the day setting will cause the
●
mode hand to rotate repeatedly.
Hand and Day Indicator Movement
l
13.
Rotate the crown to change the day.
Day
14.
On a time signal at the top of a minute,
push the crown back in and lock it.
Operation Guide 5624
Configuring the Summer Time Setting
●
(Home City)
If you are in an area that observes summer
time, you can also configure a summer time
setting.
Note
2
The initial factory default summer time
3
●
setting for all cities is [AT (AUTO)]. In
4
many cases, the [AT (AUTO)] setting
lets you use the watch without
switching between summer time and
standard time.
When performing a manual operation
●
to select a time zone for which there is
no city name displayed, use [STD] or
[DST] for the summer time setting.
2
3
1.
Loosen the crown and then pull it out to the
second click.
4
The second hand will move to the city
code of the currently selected Home City.
The mode hand will point to the summer
●
time setting for the currently selected
Home City.
2.
Hold down (A) for at least one second.
Each time you hold down (A) for at least
one second, the summer time setting will
cycle to the next available option.
[AT (AUTO)]
●
The watch switches between standard
time and summer time automatically.
[STD]
●
The watch always indicates standard
time.
[DST]
●
The watch always indicates summer
time.
3.
Push the crown back in and then lock it.
Checking the Last Time
Adjustment Result
1.
Enter the Calendar Mode.
Navigating Between Modes
l
2.
Press (B).
The second hand will indicate the last time
adjustment operation result. The watch
hands will return to indicating the current
time if you do not perform any operation
for nine or ten seconds.
[Y(YES)]: Last time adjustment operation
successful.
[N(NO)]: Last time adjustment operation
failed.
Second hand
Note
Even if there was a successful time
●
calibration signal receive operation or
connection with a phone, the second
hand will point to [N(NO)] if you
adjusted the time and/or date setting
manually.
The time calibration signal receive
●
result will not be indicated after the
watch is paired with a phone.
10