Self-Check Feature; Connection; Connecting With A Phone; Unpairing - Casio 5624 Operation Manual

Self-Check Feature

OCEANUS Connected automatically
performs a self-check operation once a day to
determine whether or not watch functions are
operating normally.
Note
You can also trigger a self-check
●
operation manually.
You can use OCEANUS Connected to
●
view a self-check procedure log.
The self-check operation is performed
●
by OCEANUS Connected, and not by
the watch.

Connection

Connecting with a Phone

Your watch can connect with a phone that is
paired with it.
If the watch is not paired with the phone you
●
want to connect with, refer to the information
below and pair them.
Pair the watch with a phone.
l C
Checking the Connection with Your
●
Phone
1. X
Enter the Calendar Mode.
Navigating Between Modes
l
2. X
Press (B).
This will cause the second hand to
indicate the connection status.
The second hand points to [Y(YES)]
●
when the watch is connected with your
phone.
The second hand points to [N(NO)]
●
when the watch is not connected with
your phone.
If the watch is not connected with your
phone, perform the procedure at the link
below to connect them.
Connecting with a Phone
l
Operation Guide 5624
Connecting with a Phone
●
1.
Move the phone close to (within one meter
of) the watch.
2. X
Hold down (B) for at least 0.5 seconds
until the second hand points to [C].
This establishes a connection between
the watch and phone.
Once the watch and phone are
●
connected, the connection is
maintained.
Important!
If you have problems establishing a
●
connection, it could mean that
OCEANUS Connected is not running
on your phone. On your phone's home
screen, tap the "OCEANUS
Connected" icon. After the app starts
up, hold down the watch's (B) button
for at least 0.5 seconds.

Unpairing

Unpairing the watch from a phone requires
both OCEANUS Connected and watch
operations.
Note
If you are using an iPhone, also delete
●
the pairing information stored on the
phone.
Deleting Pairing Information from
●
OCEANUS Connected
1. Y
Tap the "OCEANUS Connected" icon.
2. Y
Perform the operation shown on the
phone screen to unpair.
Deleting Pairing Information from the
●
Watch
1. X
Hold down (C) for at least one second
to enter the Calendar Mode.
2. X
Loosen the crown and then pull it out to
the second click.
The second hand will move to the city
code of the currently selected Home City.
The mode hand will point to the summer
●
time setting for the currently selected
Home City.
Summer time setting
Home City
3. X
Hold down (B) for at least 10 seconds.
This deletes the pairing information. The
second hand will point to [C].
4. X
Push the crown back in and then lock it.
iPhone Only
●
Deleting the phone's pairing
information
For details about setting procedures, see your
phone documentation.
"Settings" "Bluetooth" Cancel the
n n
watch's device registration.

If you purchase another phone

You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
Deleting Pairing Information from the
l
Watch
Pair the watch with a phone.
l C
Crown
14