Operation Guide 5608 Before Getting Cycling Between J In the World Time Mode, the mode hand Started... Timekeeping Mode Digital points to [WT]. Display Contents This section provides an overview of the watch K In the Stopwatch Mode, the mode hand and introduces convenient ways it can be points to [ST].
Operation Guide 5608 Charging Time Guidelines Solar Charging Checking the Charge Level ● ● The table below shows guidelines for In the Timekeeping Mode, the current charge approximate charging times. level is indicated by the mode hand. This watch runs on power supplied from a...
Getting Ready Using Watch Operations to Your phone needs to have the CASIO “G- ● SHOCK Connected” app installed to pair Adjust the Time Setting with the watch.
Operation Guide 5608 Enter the Timekeeping Mode. Keep pressing (D) until the setting item Configure the date and time settings. Navigating Between Modes you want to change is selected. To reset the seconds to 00: Press (E). 1 ● Each press of (D) moves to the next...
In Google Play or the App Store, search for the Using Auto Adjust ● Whenever you want to adjust the watch’s time CASIO “G-SHOCK Connected” app and Your watch adjusts its time setting four times setting based on your phone's time, perform install it on your phone.
Operation Guide 5608 Configuring the Summer Time Setting Swapping Your World Time and Home Configuring World Time ● ● Time Settings Y Tap the “G-SHOCK Connected” icon. Y Tap the “G-SHOCK Connected” icon. Specifying a World Time City with G-SHOCK X Hold down (C) for at least 1.5 seconds...
Operation Guide 5608 Setting the Alarm Phone Finder Configuring Watch Settings You can use phone finder to trigger a tone on You can use G-SHOCK Connected to specify Y Tap the “G-SHOCK Connected” icon. the phone to make it easy to find. The tone is...
Operation Guide 5608 Disconnecting from a Phone Changing the Home City Connection Summer Time Setting Pressing any button will terminate a Bluetooth Connecting with a Phone connection and return to the Timekeeping Mode. Y Tap the “G-SHOCK Connected” icon. This section explains how to establish a Bluetooth connection with a phone that is X Hold down (C) for at least 1.5 seconds...
Operation Guide 5608 World Time Unpairing World Time City Setting World Time lets you look up the current time X If the watch is connected with a phone, Use the procedure in this section to select a in any one of 39 cities around the globe, and press any button to terminate the World Time city.
Operation Guide 5608 Stopwatch Swapping Your Home Time Measuring a Split Time and World Time The stopwatch measures elapsed time in Enter the Stopwatch Mode. 1/1000-second units for the first hour, and in Navigating Between Modes Enter the World Time Mode.
Operation Guide 5608 Timer Timing the First and Second Press (D). Place Finishers The timer counts down from a start time This causes the seconds digits to flash. specified by you. A beeper sounds when the Enter the Stopwatch Mode.
Operation Guide 5608 Alarms and Hourly Time To stop the alarm ● Use (B) and (E) to change the hour setting. Signal Pressing any button while the beeper is If you are using 12-hour timekeeping, sounding stops it. ● [P] indicates p.m.
Operation Guide 5608 Turning Off an Alarm or the Hold down (A) for at least two seconds. Press (A) to exit the setting screen. Hourly Time Signal Release the button when the hours digits [ALM] is shown on the display while an ●...
Operation Guide 5608 Important! Note Press (D) 12 times to display [AUTO]. Auto Light may not operate properly If [ALM] remains on the display, it ● ● when the watch is at a horizontal angle means that at least one alarm is still of 15 degrees or greater from turned on.
Operation Guide 5608 Hand Alignment Other Settings Changing the Date Display Adjustment Format This section explains other watch setting you can configure. Strong magnetism or impact can cause the Enter the Timekeeping Mode. time indicated by the analog hands to become Navigating Between Modes different from the time on the digital display.
Operation Guide 5608 Configuring Power Saving Returning the Watch to Its Use (E) and (B) to select a language. Function Settings Factory Default Settings [ENG]: English [ESP]: Spanish This section explains how to return the watch Enter the Timekeeping Mode.
Operation Guide 5608 Moving to Another Time Other Information In the aircraft, before arriving at your ● destination Zone This section provides non-operational Swap the origin time zone time with the information you also need to know. Refer to destination time zone time.
February or Sunday in Janeiro 00:00, fourth November Sunday in February The information in the above table is current ● as of January 2019. Supported Phones For information about phones that can connect with the watch, visit the CASIO website. https://world.casio.com/os_mobile/wat/...
[CONNECT] starts to watch. flash. For information about supported phone models, visit the CASIO Website. I can’t connect after turning off the phone. https://world.casio.com/os_mobile/wat/ Turn on the phone and tap the “G-SHOCK Did you install G-SHOCK Connected on Connected”...
Page 22
Operation Guide 5608 Phone-Watch Connection Changing to a Different The watch does not show the correct time even after (C) is pressed. Phone Model The watch will not adjust its time if you press I can’t establish a connection (C) while a stopwatch or timer operation is in between the phone and watch.