Table of Contents
Advertisement
6-3 Shot Mark Operations
To delete the entire list
Hold down the DELETE button and press the LIST
button.
This deletes all shot marks from the list. This does not
erase marks from the tape.
Erasing shot marks from the tape
To erase a shot mark, use the following procedure.
Note
Once you erase a shot mark from the tape, it cannot be
read back in.
1
With no shot mark list displayed, hold the MARK
button down for at least 2 seconds.
The REC/ERASE indicator lights green, indicating
that you can rewrite or erase shot marks.
2
Display the shot mark list.
3
Turn the search dial to select on the list the shot
mark you wish to erase.
4
Press the DELETE button and MARK button
simultaneously.
During the erasure process the message "ERASE
SHOT MARK" appears, and the REC/ERASE
indicator lights red.
5
When the erasing operation is completed, hold
down the MARK button for at least 2 seconds, to
turn off the REC/ERASE indicator.
6-6
Chapter 6 Shot Mark Function
6-3-4 Cueing Up to Shot Marks
Cueing up to a selected shot mark
Use the following procedure.
2
6
0
MARK button
REW button
1
Select the desired shot mark from the shot mark
list.
2
Press the PREROLL button.
Cueing up to shot marks adjacent to the
current tape position (index function)
To select the shot marks to which the index
function applies
In item G01 of the shot mark operation menu (page 6-
2), select one of recording start mark, shot mark 1, shot
mark 2, and post mark, or select all.
To cue up to the shot mark before or after the
current tape position
Holding down the MARK button, press the F FWD
button or REW button.
While the tape is moving the F FWD button or REW
button flashes.
Note
It is not possible to cue up to a virtual shot mark.
%
9
)
p
F FWD button
1
Advertisement
Table of Contents
