Table of Contents
Advertisement
6 REMOTE 2 PARALLEL I/O (50P) connector
(D-sub 50-pin)
Connect remote control signals from an external
device.
For details, refer to the Installation Manual.
7 Power supply section
2 BREAKER button
AC IN
BREAKER
3 Ground terminal
1 AC IN connector
Use the optional power cord to connect this to an AC
outlet.
2 BREAKER button
This jumps out if an excess current flows on the
1 AC IN connector
primary side of the AC power circuit.
3 Ground terminal
Connect this to ground.
Chapter 2 Location and Function of Parts
2-23
Advertisement
Table of Contents
