Advertisement
10. Stand the Spinner frame on the opposite end and place a
piece of foam or rag under the seat post frame section
11. Split and remove (Fig. 11) the foam covering the front of the
12. Locate the front foot assembly along with the corresponding
hardware that secures it to the Spinner frame (Fig. 12).
Hardware:
M8x1.25x30mm Hex Head Bolt 8mm Split
Lock Washer
8mm Plain Washer
Assembly & Setup
(Fig. 10).
Spinner frame.
Qty:
2
2
2
Fig. 10
Fig. 11
Fig. 12
17
Advertisement
