TP-Link TL-WA7110ND User Manual page 24

TL-WA7110ND
Click Next, and then Operation Mode page will appear, shown in Figure 3-7:
AP Client Router - In this mode, the device enables multi-users to share Internet from WISP.

The LAN port devices share the same IP from WISP through Wireless port. While connecting
to WISP, the Wireless port works as a WAN port at AP Client Router mode. The Ethernet
port acts as a LAN port.
AP Router - In this mode, the device enables multi-users to share Internet via ADSL/Cable

Modem. The wireless port share the same IP to ISP through Ethernet WAN
port. The Wireless port acts the same as a LAN port while at AP Router mode.
 Access Point - In this mode, the device can be connected to a wired network and transform
the wired access
especially for a home, office or hotel where only wired network is available.
 Multi-SSID - In this mode, the device can create up to 4 wireless networks
labeled with different
VLAN, especially
required.
 Repeater(Range Extender) - In this mode, the device can copy and reinforce the existing
wireless signal to extend the coverage of the signal, especially for a large space to eliminate
signal-blind corners.
Bridge with AP - In this mode, the device can be used to combine multiple local networks

together to the same one via wireless connections, especially for a home or office where
separated networks can't be connected easily together with a cable.
 Client - In this mode, the device can be connected to another device via Ethernet port and
act as an adaptor to grant your wired devices access to a wireless network, especially for a
Smart TV, Media Player, or game console only with an Ethernet port.
150Mbps High Power Wireless Access Point User Guide
Figure 3-6 Quick Setup
Figure 3-7 Operation Mode
into wireless that
SSIDs and assign
for the situation when the various access policies and functions are
13
multiple devices can
each SSID with different
share together,
security or