Chain Dialing; Find Handset - VTech CS5159-3 User Manual

It may be necessary to change your
telephone service to use this feature.
Contact your telephone service provider
if:
• You have both caller ID and call
waiting, but as separate service (you
may need to combine these service);
• You have only caller ID service, or
only call waiting service; or
• You do not subscribe to caller ID or
call waiting services.
There are fees for caller ID services. In
addition, services may not be available
in all areas.

Chain dialing

Use this feature to initiate a dialing
sequence from numbers stored in the
phonebook, caller ID log or redial list
while you are on a call.
Chain dialing can be useful if you wish
to access other numbers (such as bank
account numbers or access codes)
from the phonebook, caller ID log or
redial list.
To access a number from the
phonebook while on a call:
Press MENU.
1.
Press SELECT to select Phonebook.
2.
3. Press or to scroll to the desired
entry.
Press SELECT to dial the displayed
4.
number.
To access a number from the
caller ID log while on a call:
1. Press MENU.
2. Press or to choose Caller ID
log, and then press SELECT.
3. Press or to scroll to the desired
entry.
4. Press SELECT to dial the displayed
number.
To access a number from the
redial list while on a call:
1. Press REDIAL to enter the redial list.
2. Press , , or REDIAL repeatedly to
browse to the desired entry.
Press SELECT to dial the displayed
3.
number.

Find handset

This feature helps you find all system
handsets.
To start paging:
Press /FIND HANDSET on the
•
telephone base.
All idle handsets ring and display
** Paging **.
To end paging:
Press /FIND HANDSET again on
•
the telephone base. .
-OR-
, OFF,
• Press
(0-9,
,
-OR-
• Place the handset in the telephone
base or handset charger.
NOTES
Press MUTE to turn off the ringer of
•
a handset temporarily. Paging tone
continues on the other handset.
Do not press and hold /FIND HANDSET
•
for more than four seconds. It may lead
to handset deregistration. If the handset
displays To register HS... and ...see
manual, refer to the Frequently asked
questions section to register the handset
back to the telephone base.
15
or any dialing key
or ) on the handset. .