Advertisement
Step 4
C17
The main frame pieces give rigidity to
the side walls and provide a surface
for attaching the gables which sup-
port the roof.
1
Fasten the rear wall angle across
the inside top of the rear wall using
screws.
2
Fasten the rear wall channel
across the middle of the rear wall
using screws.
3
Fasten the side wall angles across
the inside top of the side panels using
screws. Side wall angles must overlap
rear wall angle in corners.
4
Fasten the side wall channels
across the middle of the side panels
using screws. Fasten overlaps in rear
corners with screws.
5
Fasten the door track assembly
(holes on top) across the top of the
front wall panels using screws. See
the fi gure.
Parts Needed For
Frames
Wall Angles
STEP
Must Face
Inside
3
Building
9400
9926
STEP
9396
5
17
9397 Rear Wall Angle (1)
9925 Rear Wall Channel (1)
9926 Side Wall Channel (2)
9400 Side Wall Angle (2)
Door Track Assembly (1)
STEP
STEP
1
2
9397
9925
Detail Showing
Center of Panel
Screwed to Wall
Channel
STEP
4
Long Leg
on Top
Opening
Facing in
Short Leg
on Bottom
Bolt and nut
does not go thru
wall channel
at overlap
Advertisement
