Pioneer Elite VSX-LX102 Basic Manual page 19

> Before Start > Part Names
CD
a Analog audio cable, b Digital coaxial cable
> Install > Initial Setup
a
b
> Playback
4. Connect the Audio Component
Example of a connection with an audio component.
Connect a CD player using a digital coaxial cable. You can
also connect a turntable that has an MM-type cartridge to
the PHONO jack.
0 If the turntable has a built-in audio equalizer, connect it to
another AUDIO IN jack. Further, if the turntable uses an
MC type cartridge, install an audio equalizer compatible
with the MC type cartridge between the unit and the
turntable, then connect to any AUDIO IN jack other than
the PHONO jack.
If the turntable has a ground wire,
connect it to the SIGNAL GND terminal of this unit.
Turntable
19