Haier HZY-40Z User Manual page 16

c) fi nal disinfection
Wipe/spray disinfectant on the removed shelf and air duct board and make it fully sterilized in
accordance with the requirements of the disinfectant manufacturer;
Dry shelf and air duct surface with clean cloth;
Reinstall shelves and air duct panels;
Alcohol disinfection!
a) Disinfectant with alcohol content of more than 10%, combine with air to form
fl ammable and explosive gas mixture;
b) The use of such disinfectants, during disinfection should avoid open fi re or high
temperature environment;
c) Use of such disinfectants in well-ventilated rooms;
After d) disinfectant reaction is fi nished, wipe the disinfectant parts clean;
e) Comply with safety regulations to avoid fi re and explosion hazards caused by
alcohol-containing disinfectants;
Chlorine disinfectant!
Chlorinated disinfectant can corrode stainless steel.
Only use disinfectants that do not cause corrosion to stainless steel.
Electric shock!
Contact with carrier parts may result in life-threatening electric shocks.
Please disconnect the transport cooler from the power supply before cleaning and
disinfection work!
a) Use the power switch to close the transport cooler;
b) Unplug to prevent accidental connection;
c) Ensure that the transport cooler is cut off ;
Health hazards!
The surface of the studio may be contaminated. Contact with contaminated
cleaning fl uid may cause infection. Disinfectants may contain harmful substances.
When cleaning and disinfecting, be sure to comply with safety instructions and
hygiene regulations!
a) wear safety gloves;
b) wear goggles;
c) wear masks and other cavity and respiratory protection devices to protect your
mucous membrane from irritation;
d) compliance with safety instructions from disinfectant manufacturers and health
regulators
14