Application Method - Haier HZY-40Z User Manual

Application Method

User setting
Press"Set"button for 5s，LED displays "TS".Press "+"or"-"LED displays:
ALH→ALL→dA→Uc→Uct→TS. Press"Set"button，LED displays the value of the parameter，
press"+"or"-"to adjust the value，After choose your needed value.Press"set"button to confi rm.
Press"Back"button to exit.
Parameter
Defi nition Set value
Range
Electric lock
Press "-"butt on for 5s，LED displays "000".Pres s"+"or"-"to input the password"0 6"，
Press"Set"button，the electric lock will open.
UVC light
Under user setting mode， when LED displays"UC".Press"Set"button， LED displays"000"， Press "+"or
"06"to input password "06"，if the password is correct，LED displays "off "，Press"+"or"-",LED diplays
"on" or "off ".Press"Set"button to confi rm your choice."UCt"means the working time for UVC light，time
range is 5 to 30mins.When LED displays"UCt"，press"Set"button.LED displays the value.Press"+"or"-
"to adjust the working time of UVC light.
Ultraviolet rays can cause irreversible damage to blood and blood products. When
turning on the ultraviolet light, make sure the chamber is empty!
Query function
Press "+" to check the highest temperature in the chamber in 24hours;
Press "-" to check the lowest temperature in the chamber in 24hours.
Ts ALH
High temp.
Alarm
-20~+20 Ts+3
ALL UC
Low temp.
UVC
Alarm
Ts-3 0/1
9
UCt
Time for UVC
5-30min