Digital Audio Networking; Dante Network Audio - Shure Microflex MXCW Manual

The floor channel is used by interpreters to provide simultaneous interpretation of the discussion. This channel is also selec­
table by other participants to listen to the floor channel on headphones or in the remote call.
To select headphone channels:
1. Connect headphones to a headphone jack on one of the sides of the conference unit.
2. Press the headphone icon on the touchscreen and select a channel from the list.
3. Adjust the volume of the headphones using the control knobs on the unit.
To select remote caller channels:
1. Connect a mobile device to the TRRS jack on the back of the conference unit.
2. Press the phone icon on the touchscreen and select a channel from the list.

Digital Audio Networking

Dante digital audio is carried over standard Ethernet and operates using standard internet protocols. Dante provides low laten­
cy, tight clock synchronization, and high Quality­of­Service (QoS) to provide reliable audio transport to a variety of Dante de­
vices. Dante audio can coexist safely on the same network as IT and control data, or can be configured to use a dedicated net­
work.

Dante Network Audio

Connect your Dante audio network to the MXCW system.
10 input channels, useful for:
• Dante-enabled microphones, such as Microflex Advance Ceiling and Table Arrays
• Output from an automatic mixer or room system
• Videoconferencing signal of far-end audio
10 output channels, useful for:
• Recording system for archiving
• Live-streaming events
Connect a network of devices
®
™
Shure Incorporated
55/86