2.
Place the charger in storage mode:
◦
From the hardware: Press and hold the Storage mode button for 5 seconds.
◦
From the software: Open the charger web application to the home page and turn on storage mode.
Access Point Installation
Best Practices When Selecting a Location for the Access Point
•
Direct the face of the access point toward the intended microphone coverage area.
•
Position the access point in the same room as the conference units, and with an unobstructed line of sight to the micro
phones.
•
Keep the device away from large metal objects.
•
Keep at least eight feet between all access points.
•
Mount with the XLR ports accessible, as it may be useful for connecting external equipment.
Important: Always perform a "walk around" test to verify coverage before using a wireless system during a speech or perfor
mance. Experiment with placement to find the optimum location.
Requirements Checklist
Make sure your equipment meets these requirements before installing the system:
•
Use shielded Cat 5e or higher Ethernet cables.
Shure Incorporated
24/86