Using The Headset Feature; Security - BellSouth MH9002 Owner's Manual

Basic Operation

Using the Headset Feature

Your telephone can utilize a headset (not included)
to be connected to your HANDSET for you to enjoy
hands-free communication. Insert the small plug at
the end of the headset into the HEADSET JACK at
the right side of the HANDSET . Follow the
procedures discussed in "Receiving Calls" and
"Placing Calls" to receive and place a call.
NOTE:
When you plug the headset plug into the
HEADSET JACK it automatically mutes the
MICROPHONE and SPEAKER of the
HANDSET. Unplug the headset to return the
HANDSET to normal use.
Headsets are available at most retail outlets that sell telephone equipment. The HEADSET JACK is
compatible with 2.5 mm headset plugs only.
Security System
Your cordless telephone uses a digital coding security system to prevent unauthorized use
of your telephone line by another nearby cordless telephone. The system has its own identifying
signal created by microcomputers in both the BASE UNIT and the HANDSET .
Security Code
This telephone has an internal security code with 65,536 possible combinations.
Resetting Security Code and Channel Information
Communication between the HANDSET and the BASE UNIT may not be possible in any of the
following situations:
1. After a power failure.
2. After relocating the BASE UNIT by disconnecting the AC ADAPTOR.
3. After replacing the HANDSET BATTERY PACK.
To reset, place the HANDSET on the BASE UNIT for 2 to 5 seconds.
Multi-Channel Access
Your cordless telephone lets you select a channel from the 40 frequencies available to transmit
signals between the BASE UNIT and the HANDSET . When you notice interference from other
cordless telephones, change to another channel by pressing the
10
HEADSET
MICROPHONE
SPEAKER
HEADSET
PLUG (2.5mm)
HEADSET JACK
button on the HANDSET .