Use Of Tools - Bosch MUMPC33S00 Instruction Manual

en

Use of tools

Cable storage
compartment
The appliance is equipped with a
cable storage compartment. The length of
the power cord can be adjusted as required
by pulling it out or pushing it back.
Safety systems
The appliance has various safety systems.
X "Safety systems" see page 25
Use of tools
W Risk of injury!
– Do not insert the mains plug until
all preparations for working with the
appliance are complete.
– While operating the appliance, never
reach into the bowl or filling shaft.
– Do not operate the appliance without
the lid in place.
– Always wait for the drive to come to a
standstill before moving the swivel arm
or changing tools.
– For safety reasons always fit the
protective drive covers on the front and
rear drive.
Preparation
■ Place the base unit on a smooth, clean
and stable surface.
■ Pull the power cord out to the required
length.
■ Press the release button and raise
the swivel arm to the stop.
■ Place the lid with the filling shaft at the
front on the main drive.
■ Insert the bowl. When doing so, use the
recesses on the base unit.
■ Turn the bowl anticlockwise until it locks
into place.
Important!
The appliance cannot be switched on
unless the bowl has been inserted correctly.
22
X Image sequence F
1. Depending on the processing task,
select the professional flexible beating
whisk, professional stirring whisk
or kneading hook X "Tools" see
page 21.
Insert the tool into the main drive until
it locks into place. The drive is then
covered by the protective cap.
2. Put the ingredients to be processed in
the bowl.
3. Press the release button and push the
swivel arm down until it locks into place.
W Risk of injury!
Carefully lower the swivel arm! Make
sure you do not get your hands or fingers
caught.
Operating the appliance
4. Plug the mains plug into the mains. Set
the rotary switch to the required setting.
Recommended speeds: X "Tools" see
page 21
5. Process the ingredients until you
achieve the required result.
6. Turn the rotary switch to y. Wait until
the drive comes to a standstill. Discon-
nect the mains plug.
7. Press the release button and raise
the swivel arm to the stop.
8. Turn the bowl clockwise until it can be
raised. Remove the bowl.
9. Press both eject buttons until the tool is
released. Take the tool out of the drive.
10. Take the lid off the drive.
11. Clean all parts immediately after use.
X "Cleaning and maintenance" see
page 23
Note: Please also use our application
examples to familiarise yourself with
your new appliance and its functions.
X "Recipes" see page 24