< Screen >
• To adjust the uniformity
Reduce color uniformity errors at the edges of the screen caused by interference from
the geomagnetic field.
<T761>
<T962>
16
3. SCREEN ADJUSTMENT
< Uniformity >
Adjust the uniformity as desired by using the control pad.
< Uniformity >
(1)
Select the direction the monitor is facing.
Select from the N, NE, E, SE, S, SW, W, NW and
Center (no correction). The "point" may be different
depending on the environment. Select the "Point" that
Top
the maximal brightness and whiteness is uniformed.
* If the uniformity is corrected, continue on to (4).
Bottom
* If some color patches remain in the corners after the
(2)
Adjust the top/bottom uniformity.
(3)
Adjust the uniformity of the for 4 edges of the screen.
* Be sure to adjust the "Top corner" first, then adjust
Top corner:
Bottom corner: Control pad "left/right"....... Left lower
(4)
Select "Save" and the press the enter button.
(If the settings are not saved, all adjustments will be
lost.)
*
Resets the uniformity function to the factory default
setting.
< Standard>
adjustment, continue on to (2).
< Top/Bottom >
< Top corner >
< Bottom corner >
the "Bottom corner".
Control pad "left/right"...... Left upper
Control pad "up/down"..... Right upper
Control pad "up/down"..... Right lower
< Save >
<Reset>