Refer Back - Mitel MiVoice 4222 Office Directions For Use Manual

M V 4222 O
I OICE FFICE
5.2
5.3
5.4
5.4.1
5.5
5.6
27
(DBC 222) M V
FOR I OICE
DISPLAY OF CHARGING
Not applicable.
INTRUSION
Depending on the authorization of your extension there is another option for getting
through to a busy extension. You can use Intrusion, which means that you are
connected to the ongoing call after a short tone burst.
To order intrusion when meeting busy
• Press the Intrusion-key or dial 4.
If intrusion on the called extension is not allowed, you will continue to receive a busy
tone.
Before the intrusion is performed a warning tone is sent to the parties in the ongoing
call. During the time the three parties are connected a warning tone will be heard.
Note: The warning tone, both before and during the intrusion, can by categorization
be disabled.
INTRUSION ON A SPECIFIC EXTERNAL LINE
If the external line is busy you can intrude. You can use Intrusion which means that you
are connected to the ongoing call after a short tone burst.
TO INTRUDE
• Dial *44*individual external line number# and external destination code (busy
tone).
• Press the Intrusion-key or dial 4.

REFER BACK

During inquiry you can switch between the connected party and the calls parked on
Line 1 and Line 2 or Inquiry-key.
To use
• Press the Line 1 or the Line 2 or the Inquiry-key.
To end
• Press the Line 1 or the Line 2 or the Inquiry-key.
• Press the Clear-key.
INQUIRY
During the course of an ongoing call, you may call another extension or subscriber.
To use
MX-ONE
2/1553-ANF 901 54 Uen F7 2018-12-03