Troubleshooting; Repair Protection Agreements - Craftsman 124.32607 Operator's Manual

Problem
The machine does not work when switched
on.
The saw blade does not move with the
motor running.
The saw blade does not cut in a straight
line.
The saw blade does not cut, or cuts very
slowly.
Sawdust builds up inside the machine.
Sawdust inside the motor housing.
The machine does not cut at
grees.
The saw blade can not be properly posi-
tioned on the wheels.

Repair Protection Agreements

Congratulations on making a smart purchase. Your new
®
Craftsman product is designed and manufactured for years of
dependable operation. But like all products, it may require repair
from time to time. That's when having a Repair Protection
Agreement can save you money and aggravation.
Here's what the Repair Protection Agreement* includes:
Expert service by our 10,000 professional repair specialists
Unlimited service and no charge for parts and labor on all
covered repairs
Product replacement up to $1500 if your covered product
can't be fixed
Discount of 25% from regular price of service and related
installed parts not covered by the agreement; also, 25% off
regular price of preventive maintenance check
Fast help by phone – we call it Rapid Resolution –
phone support from a Sears representative. Think of us
as a "talking owner's manual."
Once you purchase the Repair Protection Agreement, a
simple phone call is all that it takes for you to schedule service.
You can call anytime day or night, or schedule a service

TROUBLESHOOTING

Diagnosis
1. No power supply.
2. Defective switch.
3 Defective motor.
1. The blade tension knob has not been
tightened.
2. The blade has come off one of the
wheels.
3. The saw blade has broken.
4. The drive belt has snapped.
1. Rip fence for cutting not used.
2. Feed rate too fast.
3. The blade teeth are dull or damaged.
4. Blade guides not suitably adjusted.
1. The teeth are dull, caused by cutting
hard material or long use.
2. The saw blade was fitted the wrong way
on the band saw.
This is normal
This is normal
45 or 90 de- 1. The table is not at right angles to the
blade.
2. The saw blade is dull or too much pres-
sure was put on the work piece.
1. The wheels are not in alignment or de-
fective bearing.
2. The blade tracking knob hasn't been
properly adjusted.
3. Inferior saw blade.
Remedy
1. Check the cable for breakage.
2. Replace the lock switch.
3. Defective motor.
1. Switch off the motor, tighten the blade
tension knob.
2. Open the doors and check.
3. Replace the blade.
4. Replace the belt.
1. Use a rip fence.
2. Put light pressure on the work piece.
Make sure the saw blade does not bend.
3. Try a new saw blade.
4. Adjust the blade guides (see ADJUST-
MENT instructions).
1. Replace the saw blade, use a 6 T.P.I.
(Teeth Per Inch) saw blade for wood and
soft material. Use a 14 T.P.I. saw blade
for harder materials. A 14 T.P.I. saw blade
always cuts slower due to the finer teeth
and the slower cutting performance.
2. Fit the saw blade correctly.
Clean the machine regularly. Open the
Repair Protection Agreements
doors and remove the sawdust with a
vacuum cleaner.
Congratulations on making a smart purchase. Your new
Craftsman ® product is designed and manufactured for years of
Clean the ventilating slots of the motor with
dependable operation. But like all products, it may require repair
a vacuum cleaner. From time to time re-
from time to time. That's when having a Repair Protection
move the sawdust to prevent it from being
Agreement can save you money and aggravation.
drawn into the housing.
Here's what the Repair Protection Agreement* includes:
Expert service by our 10,000 professional repair specialists
1. Adjust the table.
Unlimited service and no charge for parts and labor on all
covered repairs
2. Replace the saw blade or put less
Product replacement up to $1500 if your covered product
pressure on the work piece.
can't be fixed
Discount of 25% from regular price of service and related
1. Replace bearing.
installed parts not covered by the agreement; also, 25% off
regular price of preventive maintenance check
2. Adjust the blade tracking knob (See
Fast help by phone – we call it Rapid Resolution –
ADJUSTMENT instructions).
phone support from a Sears representative. Think of us
3. Replace the saw blade.
as a "talking owner's manual."
Once you purchase the Repair Protection Agreement, a
simple phone call is all that it takes for you to schedule service.
You can call anytime day or night, or schedule a service
appointment online.
The Repair Protection Agreement is a risk-free purchase. If
you cancel for any reason during the product warranty period,
we will provide a full refund. Or, a prorated refund anytime after
the product warranty period expires. Purchase your Repair
Protection Agreement today!
Some limitations and exclusions apply. For prices and
additional information in the U.S.A. call 1-800-827-6655.
*Coverage in Canada varies on some items. For full details
call Sears Canada at 1-800-361-6665.
Sears Installation Service
For Sears professional installation of home appliances, garage
door openers, water heaters, and other major home items, in the
U.S.A. or Canada call 1-800-4-MY-HOME
13
.
®