Pc Health Status - Nvidia nForce 650i User Manual

3-10 PC Health Status

This section shows the Status of you CPU, Fan, and Warning for overall system status. This
is only available if there is Hardware Monitor onboard.
Show PCHealth in Post
> Smart FAN Configurations
Vcore
VCC1.22v
5VSB
+12V
+5V
VDIMM
VBAT
CPU Temperature
System 1 Temperature
CPUFAN Speed
SFAN1 Speed
SFAN2 Speed
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Shutdown Temperature
This item can let users setting the Shutdown temperature, when CPU temperature over this
setting the system will auto shutdown to protect CPU.
Show PC Health in Post
During Enabled, it displays information list below. The choice is either Enabled or Disabled
Smart FAN Configurations
Please refer to section 3-10-1
Current CPU Temperature/Current System Temp/Current FAN1, FAN2 Speed/Vcore/
Vdd/3.3V/+5V/+12V/-12V/VBAT(V)/5VSB(V)
This will show the CPU/FAN/System voltage chart and FAN Speed.
3-10-1 Smart FAN Configurations
CPUFAN Smart Mode
CPU SmartFAN Full-Speed
CPU SmartFAN Idle Temp
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
CPU/SFAN1 Smart FAN Full-Speed Temp
This item allows you setting the FAN works in full speed when the temperature over the value
which out set. If the temperature below the value but over the Idle Temperature, the FAN
will works over 60% of full speed, and the higher temperature will gain higher FAN speed,
after over the temperature which this item setting, the FAN works in full speed.
Phoenix – AwardBIOS CMOS Setup Utility
PC Health Status
Enabled
Press Enter
1.38V
1.21V
4.92V
11..04V
4.33V
1.84V
3.14V
33 ° C/91 ° F
38 ° C/96 ° F
4440 RPM
3375 RPM
3375 RPM
F6:Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
Smart FAN Configurations
Enabled
50
30
F6:Optimized Defaults
Menu Level >
F7:Standard Defaults
Menu Level >
F7:Standard Defaults
42
Item Help
Item Help