Blizzard 7600LT Owner's Manual page 29

REMOVING SNOWPLOW FROM VEHICLE & STORAGE
CAUTION
On 2-plug electrical systems, plug covers
shall be used whenever snowplow is
disconnected. Vehicle battery cable is 12V
unfused source.
8. Unplug electrical harnesses.
NOTE: After each use of the snowplow, reapply
dielectric grease to the electrical plugs to
maintain the protective coating on the terminals.
NOTE: Place electrical plugs in storage position.
The plugs are equipped with plug covers.
Lit. No. 40595, Rev. 05 29 May 1, 2021