Headers - Nvidia nForce 550 MCP User Manual

(9) Serial-ATAII Port connector:SATA1/SATA2/SATA3/SATA4/SATA5/SATA6
This connector supports the provided Serial ATA2 IDE hard disk cable to connect the
motherboard and serial ATAII hard disk.
SATA7 is not for SATA harddrive ,it is only for connecting to SATA 1~6 to let the
ESATA port work.
(10) SLI Power Supply: J1
(13) ESATA Port: ESATA1 (optional)
This connector supports the External Serial ATA2 (eSATA) enable the full SATA interface
speed outside the chassis, up to 3Gb/s. The ESATA port can be enabled only when the
SATA 7 is connected to one of SATA1-SATA6

2-6-2 Headers

(1) CD Audio-In Headers (4-pin) : CDIN
CDIN are the connectors for CD-Audio Input signal. Please connect it to CD-ROM or
CD-Audio output connector.
SATA7
SATA6
SATA5
SATA4 SATA4
SATA3
SATA3
SATA2
SATA1
Serial-ATAII1 & 2 Compatible Connectors
This connector is for SLI Power Supply.
C DIN
4 1
CD Audio-In Headers
i22
Optional
ESATA