Onkyo HT-S3910 Instruction Manual page 57

5.1-channel home theater system
Hide thumbs Also See for HT-S3910:
Table of Contents

Advertisement

• To enable transfer of this audio format, connect via an HDMI cable and set
audio output on the player to Bitstream output.
„ Full Mono
In this mode, all speakers output the same sound in mono, so the sound you hear
is the same regardless of where you are within the listening room.
„ Mono
In this mode, monaural audio is played from the center speaker at the time of
inputting an analog signal or PCM signal. If there is no center speaker connected,
monaural audio is played from the front speakers.
„ Multich (Multichannel)
This mode is suitable to play sources recorded in multichannel PCM.
„ Orchestra
This mode is suitable for classical or operatic music. This mode emphasizes the
surround channels in order to widen the sound image, and simulates the natural
reverberation of a large hall.
„ Surround Enhancer*
This mode allows you to enjoy sound with a rich sound field, enveloping you
naturally without relying on reflections from walls. A virtual surround channel is
created to give you a broader sound field.
• This mode cannot be selected when DTS signal is input.
• This mode cannot be selected when "Speaker Virtualizer" (
"Off" (Default: On).
* This function will become unavailable for selection if the firmware is updated after
purchase or the firmware is switched in the product production process. For details of
firmware update, see "Additional Function (Firmware Update)" (
„ Stereo
In this mode, sound is output from the right and left front speakers and
subwoofer.
Contents
„ Studio-Mix
This mode is suitable for rock or pop music. This mode creates a lively sound
field with a powerful acoustic image as if you are at a club or rock concert.
„ T-D (Theater-Dimensional)
In this mode, you can enjoy a virtual playback of multichannel surround sound
even with only two or three speakers. This works by controlling how sounds
reach the listener's left and right ears.
• This mode cannot be selected when "Speaker Virtualizer" (
"Off" (Default: On).
„ TV Logic
Suitable for TV shows produced in a TV studio. This mode gives clarity to voices
by enhancing the entire surround sounds, and creates a realistic acoustic image.
„ Unplugged
Suitable for acoustic instruments, vocals and jazz. This mode emphasizes the
front sound field image, giving the impression of being in front of the stage.
p73) is set to
p5).
57
Connections
Playback
Front Panel≫ Rear Panel≫ Remote≫
Setup
p73) is set to

Advertisement

Table of Contents
loading

Table of Contents