Table of Contents
Advertisement
CONFIGURATIONS > Configuring various functions (Setup menu)
Connecting the unit to a Bluetooth® device that receives
transmitted audio
Establishes a connection between the unit and Bluetooth devices (such as speakers and headphones) that
receive audio transmitted from the unit when "Transmitter" is set to "On" in the "Setup" menu.
Setup menu
"Bluetooth" > "Audio Send" > "Device Search"
1
Confirm the message and press ENTER.
A list of Bluetooth devices that can connect to the unit is displayed.
2
Select the list.
3
Select the Bluetooth speakers/headphones to be connected with the unit.
A check mark is put on the desired device.
4
Select "CONNECT".
When the connection process finishes, "Completed" is displayed.
5
Select "OK".
This completes the settings.
NOTE
If the desired Bluetooth device is not displayed on the list, set the Bluetooth device to pairing mode and then perform "Device
(
Search" operation again.
To terminate the Bluetooth connection, perform a disconnect operation on the Bluetooth speakers/headphones.
(
Related links
"Setting the use of audio transmission to a Bluetooth® device" (p.263)
(
"Basic operation of the Setup menu" (p.191)
(
264
Advertisement
Table of Contents
