JVC KD-R728BT Instructions Manual page 24

Menu item
SUB.W
SUB.W LPF *
SUB.W LEVEL *
HPF
BEEP
AMP GAIN *
SSM
AREA
MONO
IF BAND
USB * 7
IPOD SWITCH *
AUDIOBOOKS *
BLUETOOTH
* 5
Displayed only when <SUB.W> is set to <SUB.W ON>.
* 6
The volume level automatically changes to "VOLUME 30" if you change to <LOW POWER> with the volume
level set higher than "VOLUME 30."
* 7
Displayed only when "USB FRONT/ USB REAR" is selected as the source.
* 8
Displayed only when"IPOD-FRONT/ IPOD-REAR" is selected as the source.
24 ENGLISH
SUB.W ON : Turns on the subwoofer output. / SUB.W OFF : Cancels.
5
LOW 55Hz / MID 85Hz / HIGH 120Hz : Frequencies lower than 55 Hz/ 85 Hz/
120 Hz are sent to the subwoofer. / LPF OFF : Deactivates (all signals are sent to the
front/rear speakers).
5 00 — 08 [ 04 ] : Adjusts the subwoofer output level.
LOW 62Hz / MID 95Hz / HIGH 135Hz : Activates the High Pass Filter.
Frequencies lower than 62 Hz/ 95 Hz/ 135 Hz are cut off from the front/rear speakers. /
OFF : Deactivates (all signals are sent to the front/rear speakers).
ON / OFF : Activates or deactivates the keypress tone.
6 LOW POWER : VOLUME 00 – VOLUME 30 (Selects if the maximum power
of each speaker is less than 50 W to prevent damaging the speakers.) /
HIGH POWER : VOLUME 00 – VOLUME 50
Displayed only when the source is "FM." For settings, see page 7.
US : When using in North/Central/South America. AM/FM intervals are set to
10 kHz/200 kHz. / EU : When using in any other areas. AM/FM intervals are set to
9 kHz/50 kHz. / SA : When using in South American countries where FM interval is
50 kHz. AM interval is set to 10 kHz.
Displayed only when the source is "FM." For settings, see page 7.
AUTO : Increases the tuner selectivity to reduce interference noises between adjacent
stations. (Stereo effect may be lost.) / WIDE : Subject to interference noises from
adjacent stations, but sound quality will not be degraded and the stereo effect will
remain.
DRIVECHANGE : Selects to change the drive when a multiple drives device is
connected to the USB input terminal (front/rear).
8 HEAD MODE : Controls iPod playback through the unit. / IPOD MODE : Controls
iPod playback through the iPod/iPhone. / APP MODE : The sound of any functions
(musics, games, applications, etc.) running on the connected iPod/iPhone is emitted
through the speakers connected to this unit.
8 NORMAL / FASTER / SLOWER : You can select the playback speed of the
Audiobooks sound file in your iPod/iPhone.
• Initial selected item depends on your iPod/iPhone setting.
If the USB Bluetooth Adapter is not connected to the unit, "PLEASE CNNT BT ADAPTER"
scrolls on the display. For settings, see page 11.
Selectable setting, [ Initial: Underlined ]