Using A Bluetooth Mobile Phone - JVC KD-R728BT Instructions Manual

To delete a registered device
1 Press and hold MENU.
2 Turn the control dial to select
<BLUETOOTH>, then press to confirm.
3 Turn the control dial to select
<DELETE PAIR>, then press to confirm.
4 Turn the control dial to select a device
you want to delete, then press to confirm.
5 Turn the control dial to select
<DELETE YES>, then press to confirm.
"DELETED" appears when the device is
deleted.
If <DELETE NO> is selected, the unit returns
to step 4 above.

Using a Bluetooth mobile phone

Making a call
1
] Enter "Hands-Free" screen.
2
] Select a calling method or make
a setting. (DIALED/ RECEIVED/
MISSED CALL/ PHONEBOOK/
DIAL NUMBER/ VOICE/ SETTINGS)
3
If DIALED/ RECEIVED/ MISSED CALL/
PHONEBOOK is selected in step 2 ...
Turn the control dial to select the name/
phone number you want to call, then
press the control dial to confirm.
• "NO HISTORY" appears if there is no
history stored.
• "NO DATA" or "SEND P. BOOK" j
"MANUALLY" appears depending on the
"P. BOOK SEL" settings. (page 14)
To connect/disconnect a registered device
1 Press and hold MENU.
2 Turn the control dial to select
<BLUETOOTH>, then press to confirm.
3 Turn the control dial to select
<CONNECT PH/ CONNECT AU> or
<DISCONNT PH/ DISCONNT AU>, then
press to confirm.
4 Turn the control dial to select a device
you want to connect/disconnect, then
press to confirm.
"CONNECTED/ DISCONNECT" = "[Device
name]" scrolls on the display when the
device is connected/disconnected.
If DIAL NUMBER is selected in step 2 ...
Enter the phone number to dial.
Turn the control dial to select a number
or character (see table below), press
4
/¢
position. Once you finished entering the
number, press the control dial to confirm.
If VOICE is selected in step 2 ...
Speak the name (registered words) you
want to call when "WAIT VOICE" =
"[Device name]" scrolls on the display.
• Press and hold
dial operation directly if only one phone
is connected.
If two phones are connected, pressing
and holding
screen. Turn the control dial to select a
phone to activate voice dial operation,
then press to confirm.
• Only accessible when the connected
mobile phone has the voice recognition
system.
• "NOT SUPPORT" appears if the
connected phone does not support this
feature.
to move to the entry
to activate voice
will enter "Phone list"
Continued...
ENGLISH 13