Back Panel - Edimax BR-6214K Quick Installation Manual

(Port 1-4) Flashing
ON
USB
Off
Flashing USB printer is
ON
WLAN
Off
Flashing Wireless LAN is sending / receiving data

1-3 Back Panel

Item Name
Power
Reset
1 - 4
WAN
LAN port is sending / receiving data
USB storage device is connected
USB storage device is not
printing(BR-6315SRg)
Wireless LAN has been activated
Wireless LAN is disabled
(BR-6315SRg)
Description
Power connector, connects to power adapter
The Reset button allows you to do one of two things：
1) If problems occur with your router, press the router's
reset button with a pencil tip (for less than 5
seconds) and the router will re-boot itself, keeping
your original configurations.
2) If problems persist or you experience extreme
problems or you forgot your password, press the
reset button till the LED of WLAN is flashing (around
10~26 seconds ) and the router will reset itself to the
factory default settings (warning: your original
configurations will be replaced with the factory
default settings)
Local Area Network (LAN) ports 1 to 4
Wide Area Network (WAN / Internet) port
3
(BR-6315SRg)
connected(BR-6315SRg)