Get To Know The Broadband Router; Back Panel - Edimax Wireless Multi-Homing Broadband Router User Manual

charged by ISP, please TURN OFF THE ROUTER WHEN YOU FINISHED USING THE
INTERNET.

Get to know the Broadband Router

Back Panel

The diagram (fig1.0) below shows the broadband router's back panel. The router's back panel is
divided into three sections, LAN, WAN, USB and Reset:
1) Local Area Network (LAN)
The Broadband router's 4 LAN ports are where you connect your LAN's PCs, printer servers,
hubs and switches etc.
2) Wide Area Network (WAN)
The WAN ports are the segment connected to your xDSL or Cable modems and are linked to
the Internet.
3) Universal Serial Bus (USB)
These 2 USB ports are where you connect to USB printer.
3) Reset
The Reset button allows you to do one of two things.
1) If problems occur with your router, press the router's reset button with a pencil tip (for
less than 4 seconds) and the router will re-boot itself, keeping your original
configurations.
2) If problems persist or you experience extreme problems or you forgot your password,
press the reset button for longer than 4 seconds and the router will reset itself to the
factory default settings (warning: your original configurations will be replaced with
the factory default settings)
Figure 1.0
5