Edimax AR-7084A User Manual page 63

IP / MAC Filter Rule Editing
Parameter
IP/MAC Filter Rule
Index
Rule Type
Active
Source IP Address
Subnet Mask
Port Number
Destination IP Address Enter the start IP Address which will be monitored. If
Subnet Mask
Port Number
Protocol
MAC Address
Description
This is the item number to record the setting rule.
Select to filter through the IP Address or MAC Address.
Select "Yes" to enable the current rule, select "No" to
cancel the current rule.
Enter the start IP Address which will be monitored. If
"0.0.0.0" is set, it means for any IP Address.
Enter the Subnet Mask based on the Source IP Address.
LAN users use port number to distinguish one network
application over another such as 21 is for FTP service.
The port number range is from 0 to 65535. It is
recommended that this option be configured by an
advanced user.
"0.0.0.0" is set, it means for any IP Address.
Enter the Subnet Mask based on the Destination IP
Address.
This is the port or port ranges that define the application.
It is the packet protocol type used by the application.
Please select "TCP", "UDP" or "ICMP". For example, FTP
service, you have to select "TCP".
The MAC address (Media Access Control address) is a
55